Epson AcuLaser CX37DN Series Reference Manual page 166

Item
Port Number
Enable SSL
Port Number(SSL)
Search Base
Attribute
Search Method
Timeout
Description
Specify the port number of the LDAP server.
Range: 1 to 65535
Default: 389
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - LDAP PORT NO.
Select whether SSL is enabled or disabled.
Choices: On, Off
Default: Off
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - SSL SETTING
Specify the port number of the LDAP server when SSL is used.
Range: 1 to 65535
Default: 636
Specify the search starting point in a hierarchical structure arranged on the LDAP server.
Range: Up to 64 characters
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - SEARCH BASE
Specify the attribute that acquires.
Range: Up to 32 characters
Default: cn
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - ATTRIBUTE
The specified characters can be searched for at the beginning, within or at the end.
Choices: Begin, Contain, End
Default: Contain
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - SEARCH METHOD
Specify the maximum wait time during a search.
Range: 5 to 300
Default: 60
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - LDAP TIMEOUT
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
166