Epson AcuLaser CX37DN Series Reference Manual page 54

Range
Notes
SUBNET MASK
Purpose
Default
Range
Notes
GATEWAY
Purpose
Default
Range
0-255 for each xxx triplet
Use the keypad to input each number; use the l and r keys to move between
triplets.
A single digit number, such as "1", cannot be input as "001".
Align the number on the left and input "1" as "1 _ _". Use the l and r keys to move
between triplets.
The Back key can also be used for deleting. To cancel IP Address menu, hold down
the Back key for more than one second, and then press the Back key again after all
settings have been cleared.
Sets the subnet mask of the network.
The subnet mask allows you to limit access to your machine (for example,
according to departmental divisions).
0.0.0.0
0-255 for each xxx triplet
Use the keypad to input each number; use the l and r keys to move between
triplets.
A single digit number, such as "1", cannot be input as "001".
Align the number on the left and input "1" as "1 _ _". Use the l and r keys to move
between triplets.
The Back key can also be used for deleting. To cancel IP Address menu, hold down
the Back key for more than one second, and then press the Back key again after all
settings have been cleared.
Sets the address of the router/gateway when a router/gateway is used on your
network and you allow users outside your network environment to print on your
machine.
0.0.0.0
0-255 for each xxx triplet
Use the keypad to input each number; use the l and r keys to move between
triplets.
Epson AcuLaser CX37 Series
Understanding the Network Setting Menu
Reference Guide
54