Item
Cancel button
Certificate Request
Item
Certificate Request
Save button
OK button
Install a Certificate
Item
Install a Certificate
Next button
Back button
Cancel button
Encryption Strength Setting
Note:
This menu item appears if a certificate is installed.
Item
Encryption Strength
Description
Click to cancel the entered data and return to the Network - SSL/TLS - SSL/TLS
Information page.
Description
Displays the data that should be submitted to the certificate signing authority.
This is called CSR (Certificate Signing Request). This data is to be submitted to the
certificate signing authority by the user.
Click to save the data for requesting the certificate with the specified name.
Click to return to the Network - SSL/TLS - SSL/TLS Information page.
Description
Signed CSR (Certificate Signing Request) should be pasted to this text area.
Click to display the Network - SSL/TLS - Encryption Strength Setting page.
Click to return to the Network - SSL/TLS - SSL/TLS Setting page.
Click to cancel the entered data and return to the Network - SSL/TLS - SSL/TLS
Information page.
Description
Specify the encryption level.
Choices:
❏
AES_256bits
❏
AES_256bits, 3DES_168bits
❏
AES_256bits, 3DES_168bits, RC4_128bits
❏
AES_256bits, 3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits
Default: AES_256bits, 3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
186