Epson AcuLaser CX37DN Series Reference Manual page 173

Item
Realm
Apply button
Clear button
FTP
Server
Item
FTP Server
Apply button
Clear button
Client
Item
Send
Proxy Server
Description
Specify the realm used with Basic or Digest authentication.
Range: 1 to 127 bytes
Default: IPP
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Description
Enables or Disables the FTP server.
Choices: Enable, Disable
Default: Disable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - FTP SERVER
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Description
If Enables is selected, FTP transmission is enabled.
Choices: Enables, Disable
Default: Disable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - FTP TX
Specify the address when using via proxy server. IPv4 address or FQDN (Fully
Qualified Domain Name) can be specified.
Range: Up to 64 characters
Default: 0.0.0.0
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
173