Notification Settings
Status Notification Settings
Item
IP Address
IPX Address
Email Address
Description
Notification Address
Specify the IP address of the SNMP trap receiver. An IPv4 or IPv6
address or a host name can be specified.
Range: Up to 63 bytes
Default: 0.0.0.0
Port Number
Specify the port number of the SNMP trap.
Range: 1 - 65535
Default: 162
Community Name
Specify the community name for the SNMP trap.
Range: 1 to 15 bytes
Default: public
Notification Address
Specify the IPX address of the SNMP trap receiver.
Range: 8 bytes
Default: 00000000
Node Address
Specify the node address of the SNMP trap receiver.
Range: 12 bytes
Default: 000000000000
Community Name
Specify the community name for the SNMP trap.
Range: 1 to 15 bytes
Default: public
Email Notice
Specifies whether or not a notification is sent by e-mail when a
warning occurs in the printer.
Choices: Enable, Disable
Default: Enable
Notification Address
Specifies the e-mail address where the notification is sent.
Range: Up to 320 bytes
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
116