Setting Up The Printer Web Page; Determining The Printer Name - Epson AcuLaser CX37DN Series Reference Manual

3. In the Server Manager main window, select Configure IE ESC in the Security Information section.
4. Set both Off for Administrators and Off for Users.
5. Click the OK button.

Setting Up the Printer Web Page

Setting up the printer web page to run on your network involves two basic steps:
❏ Determining the name or address of your printer
❏ Setting up the "no proxy" preferences in your browser software

Determining the Printer Name

The printer web page can be accessed in two ways:
❏ Through the assigned name of the printer—This name comes from the IP host table (the filename
is hosts) on the computer system and is usually assigned by the system administrator (for
example, Epson AcuLaser CX37). It may be more convenient for you to use the printer name than
the IP address.
Location of the Host Table on the PC
Windows Server 2008/Server 2008 R2/Server 2003/XP/Vista/7
\windows\system32\drivers\etc\hosts
❏ Through the printer's IP address—The IP address of your printer is a unique number and,
therefore, may be the preferred identification to enter, especially if you have more printers active
in your network. The printer's IP address is listed on the configuration page.
Location of the Configuration Page in the Printer's Configuration Menu
❏ REPORT/STATUS - REPORT - CONFIGURATION PAGE menu
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
78