Epson AcuLaser CX37DN Series Reference Manual page 167

Item
Maximum Search Results
Authentication Method
LDAP Account
Password
Domain Name
Apply button
Description
Specify the maximum number of destinations displayed after a search.
Range: 5 to 100
Default: 100
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - MAX. SEARCH RESULTS
Select the authentication method used for logging on to the LDAP server.
If Anonymous is selected, a user name and password are not necessary.
If Simple is selected, a user name and password are necessary.
If Digest-MD5 is selected, use with a general LDAP server. This cannot be used with Active
Directory.
If GSS-SPNEGO is selected, use with Active Directory in Windows.
If NTLMv2 is selected, use NTLM authentication in Windows.
Choices: Anonymous, Simple, Digest-MD5, GSS-SPNEGO, NTLMv2
Default: Anonymous
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - AUTHENTICATION
Note:
If " GSS-SPNEGO " is used, the address of the LDAP server to be used must be specified in the
System - Date/Time - Time Adjustment Settings - NTP Server Address page, and the time on
this machine and the LDAP server must be the same.
Specify the account used to connect to the LDAP server.
Range: Up to 64 characters
Default: anonymous
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - LDAP ACCOUNT
Specify the password used to connect to the LDAP server.
Range: Up to 32 characters
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - LDAP PASSWORD
Specify the necessary domain name used to connect to the LDAP server.
Range: Up to 64 characters
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - DOMAIN NAME
Applies the configuration settings in this window.
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
167