Adding A Printer From The Network Window - Epson AcuLaser CX37DN Series Reference Manual

Note:
❏ If the printer driver is not correctly installed, the driver must be updated using Update Driver ....
For details, refer to "Updating the driver after connecting this machine" on page 71.
❏ In Windows Vista/Server 2008, you can continue the task and specify the printer driver
installation disk to install the printer driver if it is not installed in advance.
When the Found New Hardware window appears, follow the displayed messages to perform the
procedure. For details, refer to "Adding a printer from the Network window" on page 68.
❏ In Windows 7/Server 2008 R2, you cannot specify the installation disk after the machine is
connected to the computer. Install the printer driver in advance (Step 1).

Adding a printer from the Network window

In Windows Vista/Server 2008, you can add a Web service device using the addition function of the
printer after connecting this machine.
Note:
In Windows 7/Server 2008 R2, a window for specifying an installation disk does not appear after the
machine is connected to the computer. To connect this machine as described in "Making the printer
driver known from the Network window" on page 67.
1. Insert the Software Disc in the CD/DVD drive of your computer.
Note:
❏ Click Run AutoRun.exe in the AutoPlay dialog box that appears when the Software Disc is
inserted.
❏ If the installer does not start up automatically, double-click the EPSETUP.EXE icon on the
Software Disc.
The installer starts up.
2. Exit the installer.
3. Turn on the power of the machine while it is connected to the network.
Since the printer is searched for, be sure to connect the machine to the network.
4. To use Web Service print, check that Network discovery is enabled in Network and Sharing
Center on the computer.
Epson AcuLaser CX37 Series Reference Guide
Network Printing 68