Epson AcuLaser CX37DN Series Reference Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. AcuLaser CX37DN Guide
  6. Reference manual

Epson AcuLaser CX37DN Series Reference Manual

Durable colour multifunctions
Hide thumbs Also See for AcuLaser CX37DN Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Setup Manual

Reference Guide

NPD4497-00 EN

Advertisement

Table of Contents
loading

Related Manuals for Epson AcuLaser CX37DN Series

Summary of Contents for Epson AcuLaser CX37DN Series

  • Page 1: Reference Guide

    Reference Guide NPD4497-00 EN...

  • Page 2: Software License Agreement

    Epson Corporation’s operating and maintenance instructions. Seiko Epson Corporation and its affiliates shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
  • Page 3 PUNITIVE or special damages, including any lost profits or lost saving, even if Epson has been advised of the possibility of such damages, or for any claim by any third party. Epson or its licensor disclaims all warranties with regard to the software, express or implied, including, without limitation implied warranties of merchantability, fitness for a particular purpose, title and non-infringement of third party rights.

  • Page 4: About Adobe Color Profile

    No title to the intellectual property in the Software is transferred to you under the terms of this Agreement. You do not acquire any rights to the Software except as expressly set forth in this Agreement. Epson AcuLaser CX37 Series Reference Guide Copyright Notice...
  • Page 5 JURISDICTION TO JURISDICTION. The provisions of Sections 4, 5 and 6 shall survive the termination of this Agreement, howsoever caused, but this shall not imply or create any continued right to use the Software after termination of this Agreement. Epson AcuLaser CX37 Series Reference Guide Copyright Notice...
  • Page 6 Convention on Contracts for the International Sale of Goods, the application of which is expressly excluded. All disputes arising out of, under or related to this Agreement will be brought exclusively in the state Santa Clara County, California, USA. Epson AcuLaser CX37 Series Reference Guide Copyright Notice...

  • Page 7: Icc Profile For Toyo Ink Standard Color On Coated Paper (Toyo Offset Coated 2.1)

    (including damages for loss of business profits, business interruption, loss of business information, and the like) arising out of the use or inability to use this ICC Profile. Epson AcuLaser CX37 Series Reference Guide Copyright Notice...

  • Page 8: Dic Standard Color Profile License Agreement

    Profile, but DIC retains all right, title and interest, including all copyright and intellectual property rights, in and to, the Profile and all copies thereof. All rights not specifically granted in this License Agreement, including all copyrights, are reserved by DIC. Epson AcuLaser CX37 Series Reference Guide Copyright Notice...
  • Page 9 Profile. This License Agreement does not authorize you to use DIC’s or its licensors’ names or any of their respective trademarks. Epson AcuLaser CX37 Series Reference Guide Copyright Notice...
  • Page 10 The failure or delay of DIC to exercise any of its rights under this License Agreement or upon any breach of this License Agreement shall not be deemed a waiver of those rights or of the breach. Epson AcuLaser CX37 Series Reference Guide...

  • Page 11: Openssl Statement

    OpenSSL Project. 6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)” Epson AcuLaser CX37 Series Reference Guide Copyright Notice...

  • Page 12: Original Ssleay License

    1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Epson AcuLaser CX37 Series Reference Guide Copyright Notice...
  • Page 13 The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.] Epson AcuLaser CX37 Series Reference Guide Copyright Notice...

  • Page 14: Netsnmp License

    ❏ Neither the name of the Networks Associates Technology, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. Epson AcuLaser CX37 Series Reference Guide Copyright Notice...

  • Page 15: Part 3: Cambridge Broadband Ltd. Copyright Notice (Bsd)

    HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Epson AcuLaser CX37 Series Reference Guide Copyright Notice...

  • Page 16: Part 4: Sun Microsystems, Inc. Copyright Notice (Bsd)

    Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: ❏ Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Epson AcuLaser CX37 Series Reference Guide Copyright Notice...

  • Page 17: Part 6: Cisco/Buptnic Copyright Notice (Bsd)

    ❏ Neither the name of Cisco, Inc, Beijing University of Posts and Telecommunications, nor the names of their contributors may be used to endorse or promote products derived from this software without specific prior written permission. Epson AcuLaser CX37 Series Reference Guide Copyright Notice...

  • Page 18: Kerberos

    Epson AcuLaser CX37 Series Reference Guide THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR...
  • Page 19 Epson AcuLaser CX37 Series Reference Guide Portions of src/lib/crypto have the following copyright: Copyright © 1998 by the FundsXpress, INC. All rights reserved. Export of this software from the United States of America may require a specific license from the United States Government.
  • Page 20 OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Epson AcuLaser CX37 Series Reference Guide Copyright Notice...

  • Page 21: Wpa Supplicant

    Epson AcuLaser CX37 Series Reference Guide Portions funded by Sandia National Laboratory and developed by the University of Michigan’s Center for Information Technology Integration, including the PKINIT implementation, are subject to the following license: COPYRIGHT © 2006-2007 THE REGENTS OF THE UNIVERSITY OF MICHIGAN...
  • Page 22 THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Epson AcuLaser CX37 Series Reference Guide Copyright Notice...

  • Page 23: Table Of Contents

    Printing With NetWare..............36 Epson AcuLaser CX37 Series...
  • Page 24 Setting Up a Client (Windows) Settings When Using the NetWare Server....41 Chapter 3 Using Local Setup Program (for Epson AcuLaser CX37DNF only) About Local Setup Program (LSP).
  • Page 25 Language Setting..............84 Epson AcuLaser CX37 Series...
  • Page 26 Network Page..............155 Index Epson AcuLaser CX37 Series Reference Guide...

  • Page 27: Chapter 1 Operation On Linux

    Software Disc. Use the appropriate ppd file for the language. 2. From the Main Menu, select Applications, then Accessories, then Terminal. 3. Enter the command “/etc/init.d/cups restart”. Epson AcuLaser CX37 Series Red Hat Enterprise Linux 5 Desktop SUSE Linux Enterprise Desktop 10...

  • Page 28: Adding The Printer Using Printer Configuration

    ❏ TCP/IP: AppSocket/HP jetDirect, Internet Printing Protocol (ipp) or LPD/LPR Host or Printer ❏ Host name of Internet Printing Protocol (ipp): <IP address>/ipp 7. Click Forward. 8. Select Provide PPD file. 9. Click the folder icon. Epson AcuLaser CX37 Series Reference Guide Operation on Linux...

  • Page 29: Adding The Printer On The Cups Administration Web Page

    5. Enter the printer name, location, and description, and then click Continue. 6. Select a Device Port from the Device list, then click Continue. ❏ TCP/IP: AppSocket/HP JetDirect, Internet Printing Protocol (http) or LPD/LPR Host or Printer ❏ USB: USB Printer #1 Epson AcuLaser CX37 Series Reference Guide Operation on Linux...

  • Page 30: Specifying Printer Driver Settings

    Using printer Hostname - socket://Hostname:9100 Hostname may be substituted by IP Address, and Port is optional. 8. Click Continue. 9. Select Epson, click Continue. Note: A ppd file for each language is available in the corresponding “Drivers/LinuxPPD/ language” folder on the Software Disc. Use the appropriate ppd file for the language.

  • Page 31: Printer Driver Settings

    Paper Type Paper Source Manually Print on 2nd side Paper Sizes Collate Epson AcuLaser CX37 Series Settings Select Unit 3 if an optional 500-sheet paper cassette unit for the printer has been installed. Default: Disabled Select None or HDD for the storage unit that is installed.
  • Page 32 Parameters Image RGB Source/Text RGB Source/ Graphics RGB Source Image RGB Intent/Text RGB Intent/ Graphics RGB Intent Epson AcuLaser CX37 Series Settings Specifies the duplex print binding position, if the duplex unit for the printer has been installed. Default: Simplex Specifies the color for printing as Color or Grayscale.
  • Page 33 CMYK Gray Treatment Banners Parameters Starting Banner Ending Banner Epson AcuLaser CX37 Series Settings Specifies the RGB Gray Treatment as Composite Black, Black and Gray, or Black Only. Default: Black and Gray Specifies the halftone for image/text/graphics as Line Art, Detail, or Smooth.

  • Page 34: Printing A Document

    Checking Print Jobs 1. Start up the Web browser. 2. Enter the URL “http://localhost:631”. 3. Click Manage Jobs. Note: To check the status of completed print jobs, click Show Completed Jobs. Epson AcuLaser CX37 Series Reference Guide Operation on Linux...

  • Page 35: Troubleshooting

    Watermarks cannot be printed from Kword. Epson AcuLaser CX37 Series Action The job may have been sent with a prohibited combination of settings (for example, for the paper size and media type). Printing is not possible with postcards or overhead projector transparencies if Plain Paper is selected.

  • Page 36: Chapter 2 Operation On Netware

    6. Use the NetWare server console to load PSERVER.NLM. Note: For queue user privileges, printer notification option, assignment of multiple queues, and passwords, refer to the NetWare documentation, and specify settings as necessary. Epson AcuLaser CX37 Series Protocol Used Emulation Bindery/NDS...

  • Page 37: For Print Server Mode With Netware 4.X Bindery Emulation

    Print Queue Volume fields, select Other/ Unknown from the Printer type field, and then save the specified settings. 5. Click the Esc button to quit Pconsole. 6. In Administrator mode of Web-Based EpsonNet Config, select NetWare. from the Network tab, and then specify the following settings. Epson AcuLaser CX37 Series Reference Guide Operation on NetWare...

  • Page 38: For Netware 4.X Remote Printer Mode (Nds)

    Print Queue Volume fields, select Other/ Unknown from the Printer type field, and then save the specified settings. Note: For queue user privileges, printer notification option, assignment of multiple queues, and passwords, refer to the NetWare documentation, and specify settings as necessary. Epson AcuLaser CX37 Series Reference Guide Operation on NetWare...

  • Page 39: For Netware 4.X/5.X/6 Print Server Mode (Nds)

    Print Queue Volume fields, select Other/ Unknown from the Printer Type field, and then click the Create button. Note: For queue user privileges, printer notification option, assignment of multiple queues, and passwords, refer to the NetWare documentation, and specify settings as necessary. Epson AcuLaser CX37 Series Reference Guide Operation on NetWare...

  • Page 40: For Netware 5.X/6 Novell Distributed Print Service (Ndps)

    NetWare server, and check that the IP address has been set for this machine and that this machine is 1. Log on to NetWare as an administrator from a client computer. 2. Start up NWadmin. Epson AcuLaser CX37 Series Reference Guide Operation on NetWare...

  • Page 41: Setting Up A Client (Windows) Settings When Using The Netware Server

    3. In the Printer Model list, specify the folder on the Software Disc that contains the printer driver for the operating system and printer driver to be used. 4. Follow the on-screen instructions to complete the installation. Epson AcuLaser CX37 Series Reference Guide Operation on NetWare...

  • Page 42: Chapter 3 Using Local Setup Program (For Epson Aculaser Cx37Dnf Only)

    Chapter 3 Using Local Setup Program (for Epson AcuLaser CX37DNF only) About Local Setup Program (LSP) By installing Local Setup Program (LSP) onto a computer connected to the machine, you can add, edit, delete of Addressbook, and check the counters and machine status from the computer.

  • Page 43: Installing Lsp

    ❏ If the User Account Control window appears when installing on -Windows Vista, click the Continue button or the Yes button. Starting Up LSP 1. Click the Start button, point to EPSON, Epson AcuLaser CX37, LSP and then click EPSON AL-CX37 Local Setup Program. The main window of LSP appears.

  • Page 44: Main Lsp Window

    Click + beside the machine icon to display the machine speed dialing, group dialing and favorite settings. Click + beside the machine icon to display the machine information. For details, refer to “Displaying Machine Information” on page 51. Using Local Setup Program (for Epson AcuLaser CX37DNF only) Reference Guide...

  • Page 45: Downloading Information From The Machine

    2. To register a fax or e-mail destination, click + beside Fax/E-mail. To register an FTP or SMB destination, click + beside Scan To Server. Epson AcuLaser CX37 Series Using Local Setup Program (for Epson AcuLaser CX37DNF only) Reference Guide...

  • Page 46: Adding A Speed Dial Number (Fax/E-Mail)

    ❏ A maximum of 50 numbers can be entered for a fax number. 4. Click the Details button, and then specify the transmission speed and batch transmission time. Epson AcuLaser CX37 Series Using Local Setup Program (for Epson AcuLaser CX37DNF only) Reference Guide...

  • Page 47: Adding A Speed Dial Number (Scan To Server)

    The following procedures describe how to send scan data via a server. The transmission settings and destination can first be registered as a speed dial number. For FTP transmissions 1. Click the New Registration button. Epson AcuLaser CX37 Series Using Local Setup Program (for Epson AcuLaser CX37DNF only) Reference Guide...

  • Page 48: Editing A Speed Dial Number

    The edited speed dial number appears in the Dial Registration list. Deleting a Speed Dial Number 1. Select the speed dial number to be deleted. 2. Click the Delete button. Epson AcuLaser CX37 Series Using Local Setup Program (for Epson AcuLaser CX37DNF only) Reference Guide...

  • Page 49: Programming/Editing A Group Dial

    This section provides details on registering speed dial numbers and group dial in the Favorite list. Frequently used speed dial numbers and group dial destinations can be registered in the Favorite list. Epson AcuLaser CX37 Series Using Local Setup Program (for Epson AcuLaser CX37DNF only) Reference Guide...

  • Page 50: Printing The List Of Speed Dial, Group Dial And Favorite

    3. Click the OK button. 4. Specify the appropriate settings in the Print dialog box, and then click the OK button. The list is printed. Epson AcuLaser CX37 Series Using Local Setup Program (for Epson AcuLaser CX37DNF only) Reference Guide...

  • Page 51: Displaying Machine Information

    ❏ If the User Account Control window appears when uninstalling on -Windows Vista, click the Continue button or the Yes button. 1. Click the Start button, point to EPSON, Epson AcuLaser CX37, LSP and then click Uninstall. 2. Follow the on-screen instructions.

  • Page 52: Chapter 4 Understanding The Network Setting Menu

    This menu provides access to all of the configurable network items. Press this key . . . Note: The machine is automatically restarted if any of the following Ethernet settings are changed. Epson AcuLaser CX37 Series (until) the message window reads . . . UTILITY ACCESSIBILITY ADMIN.

  • Page 53: Using The Network Setting Menu Options

    ❏ 224.0.0.0 - 255.255.255.255 TCP/IP Purpose Options Default IP ADDR. SETTING IP ADDRESS Purpose Default Epson AcuLaser CX37 Series Enables or disables TCP/IP. DISABLE/ENABLE ENABLE Sets the IP address of this machine on the network. 0.0.0.0 Understanding the Network Setting Menu Reference Guide...
  • Page 54 GATEWAY Purpose Default Range Epson AcuLaser CX37 Series 0-255 for each xxx triplet Use the keypad to input each number; use the l and r keys to move between triplets. A single digit number, such as "1", cannot be input as "001".
  • Page 55 Purpose Options Default Epson AcuLaser CX37 Series A single digit number, such as "1", cannot be input as "001". Align the number on the left and input "1" as "1 _ _". Use the l and r keys to move between triplets.

  • Page 56: Dynamic Dns

    Options Default DYNAMIC DNS Purpose Options Default Purpose Options Epson AcuLaser CX37 Series Select whether or not to enable FTP server. DISABLE/ENABLE DISABLE Select whether or not to enable FTP client. DISABLE/ENABLE ENABLE Select whether or not to enable SMB.
  • Page 57 Purpose Options Default WSD PRINT Purpose Options Epson AcuLaser CX37 Series ENABLE Select whether or not to enable Raw port. DISABLE/ENABLE ENABLE Select whether or not to enable Bidirectional. If ENABLE is selected, Raw port is enabled for bi-directional communication.
  • Page 58 IPv6 DISABLE/ENABLE Purpose Options Default AUTO SETTING Purpose Options Epson AcuLaser CX37 Series ENABLE Select whether or not to enable IPsec. DISABLE/ENABLE DISABLE Select whether or not to enable Access Permission transmissions. DISABLE/ENABLE DISABLE Select whether or not to enable Access Refuse transmissions.
  • Page 59 Purpose Options Default SPEED/DUPLEX Purpose Options Default Epson AcuLaser CX37 Series Displays the link-local address of IPv6. Displays the global address of IPv6. Displays the gateway address of IPv6. Select whether or not to enable NetWare. DISABLE/ENABLE DISABLE Select whether or not to enable AppleTalk.
  • Page 60 IEEE802.1X Purpose Options Default Epson AcuLaser CX37 Series Select whether or not to enable IEEE802.1X. DISABLE/ENABLE DISABLE Understanding the Network Setting Menu Reference Guide...

  • Page 61: Chapter 5 Network Printing

    An RJ45 connector can be used as the Ethernet interface for this machine. When connecting your machine to an Ethernet network, the tasks you perform depend on how you plan to set the machine’s IP (Internet Protocol) address. Epson AcuLaser CX37 Series Reference Guide Network Printing...
  • Page 62 (See chapter 4 “Understanding the Network Setting Menu” on page 52 for more information.) Note: When the IP address is changed, add a new port or reinstall the printer driver. Epson AcuLaser CX37 Series Reference Guide Network Printing...

  • Page 63: Printing Via Ipp (Internet Printing Protocol)

    ❏ You must have administrator privileges in order to install the printer driver. ❏ If the User Account Control window appears when installing on Windows Vista/7/Server 2008/ Server 2008 R2, click the Continue button or the Yes button. Epson AcuLaser CX37 Series Reference Guide Network Printing...

  • Page 64: With Windows Server 2008/Server 2008 R2

    If your system cannot connect to the machine, the following message appears: “Windows cannot connect to the printer. Either the printer name was typed incorrectly, or the specified printer has lost its connection to the server. For more information, click Help.” Epson AcuLaser CX37 Series Reference Guide Network Printing...

  • Page 65: Adding An Ipp Port Using Add Printer Wizard - Windows Vista/7/Server 2008/Server 2008 R2

    4. In the dialog box, click The printer that I want isn’t listed. 5. In the URL field in the next dialog box enter the machine’s network pathname in one of the following formats and then choose Next: ❏ http://ipaddress/ipp ❏ http://ipaddress:80/ipp ❏ http://ipaddress:631/ipp Epson AcuLaser CX37 Series Reference Guide Network Printing...

  • Page 66: Printing Via Function Function

    With Windows Server 2008/Server 2008 R2 When using Windows Server 2008/Server 2008 R2, settings must be specified in the operating system before the printer driver is installed. 1. Click the Start button. Epson AcuLaser CX37 Series Reference Guide Network Printing...

  • Page 67: Making The Printer Driver Known From The Network Window

    The printer driver for this machine is detected and the machine is ready to print. 6. After finishing the installation, make sure that the icon for the installed printer is displayed in the Printers or Devices and Printers window. Epson AcuLaser CX37 Series Reference Guide Network Printing...

  • Page 68: Adding A Printer From The Network Window

    Since the printer is searched for, be sure to connect the machine to the network. 4. To use Web Service print, check that Network discovery is enabled in Network and Sharing Center on the computer. Epson AcuLaser CX37 Series Reference Guide Network Printing...

  • Page 69: Adding A Printer Using Add Printer Wizard

    ❏ Installing the driver to Windows Vista/Server 2008-based computers requires the administrator authority. 1. To use Web Service print, check that Network discovery is enabled in Network and Sharing Center on the computer. Epson AcuLaser CX37 Series Reference Guide Network Printing...
  • Page 70 12. Click Browse my computer for driver software (advanced). 13. Click Browse. 14. Locate the directory on the Software Disc where the printer driver files and then click OK. 15. Click Next. 16. Click Close. 17. Click Next. Epson AcuLaser CX37 Series Reference Guide Network Printing...

  • Page 71: Updating The Driver After Connecting This Machine

    To connect this machine as described in “Making the printer driver known from the Network window” on page 67. 5. In the Hardware tab, click Properties. 6. In the General tab, click Change Settings. Epson AcuLaser CX37 Series Reference Guide Network Printing...

  • Page 72: If The Bit Number Differs Between The Server Operating System And Client Operating System

    If the bit number differs between the print server's running operating system and client computer's running operating system while Windows Server 2008/Server 2008 R2 is running on the print server, the additional driver may not be installed correctly on the print server. Epson AcuLaser CX37 Series Reference Guide Network Printing...

  • Page 73: Installing The Additional Driver

    4. Right-click the printer that was installed, and then click the appropriate menu command to display printer properties. 5. Select the Sharing tab, and then select the Share this printer check box. 6. Click Additional Drivers. The Additional Drivers dialog box appears. Epson AcuLaser CX37 Series Reference Guide Network Printing...
  • Page 74 10. Click Open. The installation begins. 11. After the installation is completed, click Close. This completes the installation of the driver for a 64-bit operating system onto the print server (32 bits). Epson AcuLaser CX37 Series Reference Guide Network Printing...

  • Page 75: Troubleshooting

    Point and Print feature when the server is running Windows Server 2003/ Server 2008 / Windows Server 2008 R2 and the client computer is running Windows XP/Vista/7. Epson AcuLaser CX37 Series Action Install the printer driver directly on the client computer. Reference Guide Network Printing...

  • Page 76: Chapter 6 Using Web-Based Epsonnet Config

    Display Language The language used in the Web-Based EpsonNet Config screens is specified from the printer’s control panel. For details, refer to the Printer/Copier/Scanner User’s Guide. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...

  • Page 77: Requirements

    1. Click the Start button. 2. Point to Administrative Tools, and then click Server Manager. Note: If the User Account Control dialog box appears, click the Continue button or the Yes. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...

  • Page 78: Setting Up The Printer Web Page

    ❏ Through the assigned name of the printer—This name comes from the IP host table (the filename is hosts) on the computer system and is usually assigned by the system administrator (for example, Epson AcuLaser CX37). It may be more convenient for you to use the printer name than the IP address.

  • Page 79: Setting Up Your Browser Software

    3. Select the Connections tab on the dialog box. 4. Choose the LAN Settings button to display the Local Area Network (LAN) Settings dialog box. 5. Select Advanced in Proxy server to open the Proxy Settings dialog box. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 80 2. From the Firefox menu choose Preferences. 3. Click Advanced at the top of the dialog box. 4. Click the Network tab. 5. In the Connection section, click Settings. The Connection Settings dialog box appears. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 81 Epson AcuLaser CX37 Series Reference Guide 6. Select the Manual proxy configuration radio button. 7. In the No Proxy for: text box, type a comma after the last entry, and then type the printer name or the IP address of your printer.

  • Page 82: Understanding The Web-Based Epsonnet Config Window

    5. Links to subtopics 6. Click to log out of current mode Navigation Selecting the main topic and subtopic displays the configuration area for the printer options (parameters) associated with your selections. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...

  • Page 83: Current Status

    User authentication and language settings can be specified by using Web-Based EpsonNet Config. In order to perform authentication, you must log on in Administrator Mode. For details on authentication, refer to “Authentication” on page 107 and “User Authentication” on page 188. Epson AcuLaser CX37 Series Description Examples...

  • Page 84: Language Setting

    108 and “User Authentication” on page 188. 1. Select Registered User. 2. Type in the user name and user password in the User Name and User Password text boxes. 3. Click the Log in button. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...

  • Page 85: Administrator Mode

    Item Copier RAM Printer RAM Memory Card Epson AcuLaser CX37 Series Description Displays the amount of copier memory installed in the printer. Displays the amount of printer memory installed in the printer. If an optional hard disk drive is installed in the printer, displays the size of the hard disk.

  • Page 86: Output Tray

    Back button Output Tray Item Tray Paper Epson AcuLaser CX37 Series Description Identifies whether the duplex unit is installed on the printer. Identifies the paper feed units installed on the printer. Note: Tray3 appears only if the optional 500-sheet paper cassette unit is installed.
  • Page 87 Item Total Used Remaining Epson AcuLaser CX37 Series Description Displays the total amount of space on the hard disk. If no optional storages are installed, “-” are displayed. Displays the amount of space on the hard disk that is used.

  • Page 88: Interface Information

    WSD Print LLTD LLMNR AppleTalk NetWare IEEE802.1x Epson AcuLaser CX37 Series Description If Enable is displayed, TCP/IP is enabled. If Enable is displayed, IPv6 is enabled. If Enable is displayed, Bonjour is enabled. If Enable is displayed, FTP transmission is enabled.

  • Page 89: Consumables And Maintenance

    Status TYPE Counter Item Total Print Total Scan Epson AcuLaser CX37 Series Description Identifies the type of network interface installed on the printer (Ethernet 10Base-T/100Base-TX/1000Base-T). Indicates the transmission speed for the network and the transmission method for bidirectional transmission. Identifies the IP (Internet Protocol) address of the Ethernet interface.

  • Page 90: Online Assistance

    Displays the web site address for assistance. Displays the help web site address for assistance. Displays the Seiko Epson web site address. Displays the web site address where you can purchase printer supplies and accessories. Displays the telephone number of the printer administrator.

  • Page 91: Registration Information

    Active Job List Item Job Number User Name File Name Epson AcuLaser CX37 Series Description Type in the current password for the user who is logged on. Range: Up to 64 characters Type in the new password. Range: Up to 64 characters Type in the new password again for confirmation.

  • Page 92: Done Job List

    Delivery Type Create Time End Time Result Back button Epson AcuLaser CX37 Series Description Displays the current status of the print job (Parsing, Printing, Cancel, Pending, or Abort). Displays the time that the job was queued. Deletes the print job(s) that applies to the checked boxes.

  • Page 93: Print Page

    Width Length Paper Type Collate Epson AcuLaser CX37 Series Description Indicates default language to be selected. The paper tray that is normally used is indicated. If Long-Edge Binding is indicated, the pages will be printed on both sides of the paper for long-edge binding.
  • Page 94 Tray1 Tray2 Tray3 This item appears only if an optional 500-sheet paper cassette unit is in- stalled. Epson AcuLaser CX37 Series Description Paper Size Indicates the setting for the size of paper loaded into Tray1. Width Indicates the paper width when Paper Size is set to Custom Size.
  • Page 95 PCL Settings Item Font Number Symbol Set Lines Per Page Font Point Size Epson AcuLaser CX37 Series Description Paper Size Indicates whether Any Paper Size setting for Tray1 is enabled or disabled. Paper Type Indicates whether Any Media Type setting for Tray1 is enabled or disabled.
  • Page 96 Black Overprint XPS Settings Item Digital Signature Print to XPS Error Epson AcuLaser CX37 Series Description Displays the font pitch in the PCL language. Indicates CR/LF code definition in PCL language. Description Indicates Postscript timeout. “0” means that no time-out control is effective.
  • Page 97 Image Printing/Text Printing/ Graphics Printing (Intent) Image Printing/Text Printing/ Graphics Printing (Gray Treatment) Epson AcuLaser CX37 Series Description If Color is indicated, the pages are printed in full color. If Monochrome is indicated, the pages are printed in black and white.
  • Page 98 PCL Font Item Number Font Name Source Epson AcuLaser CX37 Series Description Identifies the color space for RGB data. Indicates the color intent to be used on conversion RGB to CMYK by printer. Indicates the method to reproduce RGB black and gray.

  • Page 99: Report Types

    Configuration Page Utility Map PS/PCL Menu Map Page PCL Font Page PS Font Page Epson AcuLaser CX37 Series Description Displays the control number of the font. Displays the name of the fonts. Displays the storage source of the font. Description Displays the control number of the overlay.

  • Page 100: Scan Page

    This page allows you to view the currently specified dial settings. Favorite Item Name Address Epson AcuLaser CX37 Series Description Prints the directory list. Note: This menu item appears only if an optional hard disk drive is installed. Sends the page to the printer.

  • Page 101: Configuring The Printer

    Administrator Mode. System Page This page allows you to configure several user- and printer-specific items. Epson AcuLaser CX37 Series Description Click to jump to the beginning of the speed dial list within the same window. Displays the speed dial number.

  • Page 102: Device Information

    Item Paper Source Paper Size Paper Type Epson AcuLaser CX37 Series Description Displays the amount of copier memory installed in the printer. Displays the amount of printer memory installed in the printer. If an optional hard disk drive is installed in the printer, displays the size of the hard disk.
  • Page 103 Tray Paper Storage Item Total Used Remaining Epson AcuLaser CX37 Series Description Displays the maximum capacity for each paper tray. Displays the amount of paper remaining. Returns to the previous screen. Description Displays the name of the output tray. Displays the status (Ready, Full) of the output tray.
  • Page 104 WSD Print LLTD LLMNR AppleTalk NetWare IEEE802.1x Epson AcuLaser CX37 Series Description If Enable is displayed, TCP/IP is enabled. If Enable is displayed, IPv6 is enabled. If Enable is displayed, Bonjour is enabled. If Enable is displayed, FTP transmission is enabled.
  • Page 105 Status TYPE Counter Item Total Print Total Scan Epson AcuLaser CX37 Series Description Identifies the type of network interface installed on the printer (Ethernet 10Base-T/100Base-TX/1000Base-T). Indicates the transmission speed for the network and the transmission method for bidirectional transmission. Identifies the IP (Internet Protocol) address of the Ethernet interface.
  • Page 106 Range: Up to 127 bytes Sets the help web site address for printer assistance. Range: Up to 127 bytes Sets the Seiko Epson corporate web site address. Range: Up to 127 bytes Sets the web address where you can purchase printer supplies and accessories.

  • Page 107: User Information

    Export button Authentication Note: This page appears only if an optional hard disk drive is installed. Epson AcuLaser CX37 Series Description Resets all configuration settings to previous values. Description Specify the number of job logs to be retrieved. The specified number of job logs is retrieved from the most recent job logs.
  • Page 108 Search for Number User Name Edit icon Delete icon New Registration button Epson AcuLaser CX37 Series Description Select whether or not printing is permitted when public authentication is used. Choices: Allow, Restrict Default: Allow Applies the configuration settings for this window.
  • Page 109 Output Color Permission Black Apply button Clear button Cancel button Epson AcuLaser CX37 Series Description Shows the new user registration number (No.). Specify the name of the new user. Range: 1 to 64 bytes Note: ❏ A user name that already exists cannot be specified.
  • Page 110 Month Hour Minute Time Zone Apply button Clear button Epson AcuLaser CX37 Series Description Specifies the year for the printer’s internal clock. Range: 2008 - 2032 Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - USER SETTING - DATE&TIME Specifies the month for the printer’s internal clock.

  • Page 111: Time Adjustment Settings

    Clear button Daylight Saving Time Settings Item Daylight Saving Time Apply button Clear button Epson AcuLaser CX37 Series Description Select whether or not the time is automatically adjusted with NTP. Choices: Enable, Disable Default: Disable Specifies the NTP server address.

  • Page 112: Admin Password

    The following settings are not saved in the file: ❏ Phone books Item Save Settings Device Setting Epson AcuLaser CX37 Series Description Type in the current password. Range: Up to 16 bytes Sets a new password to enter Administrator Mode.

  • Page 113: Machine Settings

    Device Location Device Information Do Startup Page Auto Continue Epson AcuLaser CX37 Series Description Specify the name of the file where the machine settings are to be saved. Click Browse button to display the dialog box for browsing to the folder where the file containing the machine settings was saved.
  • Page 114 Hide Personal Information Select whether or not the File Name column in the Job tab remains blank. Choices: On, Off Default: Off Apply button Applies the configuration settings for this window. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...

  • Page 115: Rom Version

    Network Settings All Settings Clear button Reset Printer Item Reset button Epson AcuLaser CX37 Series Description Resets all configuration settings to previous values. Description Displays the ROM version of the printer engine. Displays the ROM version of the printer controller.

  • Page 116: Notification Settings

    Node Address Community Name Email Address Email Notice Notification Address Epson AcuLaser CX37 Series Description Specify the IP address of the SNMP trap receiver. An IPv4 or IPv6 address or a host name can be specified. Range: Up to 63 bytes Default: 0.0.0.0...
  • Page 117 Paper Empty Paper Jam Maintenance Replace Toner Output Tray Full Fuser Unit End Epson AcuLaser CX37 Series Description Specifies whether or not a notification is sent when the paper tray runs out of paper. Choices: Enable, Disable Default: Enable Specifies whether or not a notification is sent when a paper misfeed occurs.

  • Page 118: Total Counter Notification Settings

    Clear button Total Counter Notification Settings Item Total Counter Model Name Notification Settings Epson AcuLaser CX37 Series Description Specifies whether or not a notification is sent when the operator must be called. Choices: Enable, Disable Default: Enable Selects whether or not notification is sent to the service representative when a condition occurs that requires servicing.

  • Page 119: Job Page

    File Name Job Status Create Time Delete button Epson AcuLaser CX37 Series Description Specify settings for the notification schedules. Schedules 1 and 2 can be registered with different settings. Daily: Select this setting to send notifications at an interval in days.

  • Page 120: Print Page

    Result Back button Print Page This page allows more detailed printer settings to be specified. Epson AcuLaser CX37 Series Description Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number. If known, displays the owner of the print job.

  • Page 121: Local Interface

    Clear button Default Settings General Settings Item Paper Source Duplex Output Tray Epson AcuLaser CX37 Series Description Specifies the reception timeout (in seconds). Range: 5-300 Default: 15 Applies the configuration settings for this window. Resets all configuration settings to previous values.
  • Page 122 This menu item appears only if an optional hard disk drive is installed. Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...

  • Page 123: Paper Source Settings

    Paper Source Settings Item Tray1 Epson AcuLaser CX37 Series Description Paper Size Specifies the setting for the size of paper loaded into Tray 1. Default: A4 Configuration Menu Equivalent: UTILITY - PAPER SETUP - TRAY1 PAPER Width Specifies the paper width when Paper Size is set to Custom Size.
  • Page 124 Paper Size This item appears only if an op- Paper Type tional 500-sheet paper cassette unit is installed. Epson AcuLaser CX37 Series Description Specifies the setting for the size of paper loaded into Tray 2. Default: A4 Configuration Menu Equivalent:...
  • Page 125 Paper Type This item appears only if an optional 500-sheet paper cassette unit is installed. Epson AcuLaser CX37 Series Description Select whether or not the Any Paper Size setting is selected for Tray1. Choices: Off, Any Default: Off Configuration Menu Equivalent:...
  • Page 126 Tray Mapping Mode Logical Tray 0-9 Apply button Clear button Epson AcuLaser CX37 Series Description Tray Chaining If Enable is selected and the specified paper tray runs out of paper during printing, a paper tray loaded with paper of the same size is automatically selected so printing can continue.

  • Page 127: Pcl Settings

    Font Number Symbol Set Lines Per Page Font Point Size Font Pitch Size CR/LF Mapping Epson AcuLaser CX37 Series Description Sets the default font in the PCL language. Range: 0 - 102 Default: 0 Configuration Menu Equivalent: PS/PCL PRINT - SYS DEFAULT MENU - EMULATION - PCL - FONT SOURCE - FONT NUMBER Selects the symbol set used with the PCL language.
  • Page 128 Item Wait Timeout PS Protocol Print to PS Error Auto Trapping Epson AcuLaser CX37 Series Description Applies the configuration settings for this window. Resets all configuration settings to previous values. Description Sets Postscript timeout. “0” means that no time-out control is effective.
  • Page 129 Digital Signature Print to XPS Error Apply button Clear button Epson AcuLaser CX37 Series Description Specify whether black objects are printed (superimposed) on a neighboring color in order to prevent white space around black characters or figures. If Text/Graphic is selected, superimposed printing is applied to text and graphics.
  • Page 130 Color Separation Brightness Halftone (Image Printing/ Text Printing/Graphics Printing) Epson AcuLaser CX37 Series Description If Color is selected, the pages are printed in full color. If Monochrome is selected, the pages are printed in black and white. Choices: Color, Monochrome...
  • Page 131 Edge Enhancement (Image Printing/Text Printing/Graphics Printing) Edge Strength Economy Print Mode Epson AcuLaser CX37 Series Description Select whether image/text/graphics edges are emphasized. Choices: On, Off Default: Off (Image) / On (Text/Graphics) Configuration Menu Equivalent: PS/PCL PRINT - QUALITY MENU - EDGE ENHANCEMENT - IMAGE PRINTING/TEXT PRINTING/GRFX.
  • Page 132 Image Printing/Text Printing/Graphics Printing (Intent) Image Printing/Text Printing/Graphics Printing (Gray Treatment) Epson AcuLaser CX37 Series Description Specifies the contrast of the image. Choices: +15%, +10%, +5%, 0, -5%, -10%, -15% Default: 0 Configuration Menu Equivalent: PS/PCL PRINT - QUALITY MENU - PCL SETTING - CONTRAST Specifies the color space for RGB data.
  • Page 133 Image Printing/Text Printing/Graphics Printing (RGB Intent) Image Printing/Text Printing/Graphics Printing (RGB Gray Treatment) Epson AcuLaser CX37 Series Description Specifies the color space for RGB data. Choices: Device Color, sRGB, Apple RGB, Adobe RGB1998, ColorMatchRGB, BlueAdjustRGB, Custom Profile Default: sRGB Configuration Menu Equivalent: PS/PCL PRINT - QUALITY MENU - PS SETTING - IMAGE PRINTING/ TEXT PRINTING/GRFX.
  • Page 134 Printing/Graphics Printing (Destination Profile) Simulation (Profile) Simulation (Intent) Simulation (CMYK Gray Treatment) Epson AcuLaser CX37 Series Description Specifies the ICC destination profile to be used for printed output. Choices: Auto, Custom Profile Default: Auto Configuration Menu Equivalent: PS/PCL PRINT - QUALITY MENU - PS SETTING - IMAGE PRINTING/...
  • Page 135 This page appears only if an optional hard disk drive is installed. PS Font Note: The printer must have an optional hard disk drive to use the PS Font parameters described below. Epson AcuLaser CX37 Series Description If On is indicated, image adjustments are applied. Choices: On, Off...
  • Page 136 Number File Name Source Delete button Epson AcuLaser CX37 Series Description Specifies the download destination (HDD) of the font. Specifies the file name for the PostScript font to be downloaded. Displays a dialog box for browsing to the PostScript font file.

  • Page 137: Scan Page

    Item Name Address From Speed Dial button Epson AcuLaser CX37 Series Description Specifies the download destination (HDD) of the color profile. Specifies the file name for the color profile to be downloaded. Displays a dialog box for browsing to the color profile file.
  • Page 138 From Group Dial Item Name Address Delete button Epson AcuLaser CX37 Series Description Adds a selected group dial to the Favorite list. For details, refer to “From Group Dial” on page 138. Deletes the selected destination from the Favorite list.

  • Page 139: Speed Dial Setting

    Item Speed Dial Registration Epson AcuLaser CX37 Series Description Click to jump to the beginning of the speed dial list within the same page. Speed Dial number of 001 - 220 are Fax and E-mail destinations.

  • Page 140: Fax Destination

    Item Destination Name Destination Address Apply button Clear button Epson AcuLaser CX37 Series Description Displays the page for the type of speed dial destination selected from the list. Resets all configuration settings for this window to their user defaults. Description Specify the name of the destination.
  • Page 141 The Network - FTP - Client screen, set to Enable from Send when sending to FTP server. Also, when sending via proxy server, specify the proxy server setting. For details, refer to “Client” on page 173. Epson AcuLaser CX37 Series Description Specify the method for searching for the destination.
  • Page 142 FTP Server Address Directory Use Proxy Remote Port Number PASV Mode Epson AcuLaser CX37 Series Description Specify the name of the destination. Range: Up to 20 characters Specify the destination of IP address for FTP server. When using DNS server, host name can be specified instead of IP address.
  • Page 143 Coding method Scan area E-mail Enable Notification Notification Notification Address Epson AcuLaser CX37 Series Description Select the color tone to be used. Choices: BW Only, Color or Gray Default: Color or Gray Select the resolution of the scanner. Choices: 150 x 150, 300 x 300 Default: 300 x 300 Select the mode type for the scanner.
  • Page 144 File Destination Destination Name Destination Address Directory Epson AcuLaser CX37 Series Description Select the type of account used for logging into the FTP server. If Anonymous is selected, log in with Anonymous as the account name and guest as the password.
  • Page 145 Coding method Scan area E-mail Enable Notification Notification Notification Address Epson AcuLaser CX37 Series Description Select the color tone to be used. Choices: BW Only, Color or Gray Default: Color or Gray Select the resolution of the scanner. Choices: 150 x 150, 300 x 300 Default: 300 x 300 Select the mode type for the scanner.

  • Page 146: Group Dial Setting

    On the Scan - Group Dial Setting page, settings for group dialing can be specified. Item Name Address Delete button Epson AcuLaser CX37 Series Description Select the type of account used for logging into the SMB server. If Anonymous is selected, log in with Anonymous as the account name and guest as the password.

  • Page 147: Fax Configuration

    Fax Configuration User Data Resistration In the Scan - Fax Configuration - User Data Registration page, user information can be registered. Epson AcuLaser CX37 Series Description From the drop-down list, select the type of group dial destination to be added.

  • Page 148: Transmission Operation

    Clear button Transmission Operation Item Density Level Quality Priority Default TX Epson AcuLaser CX37 Series Description Specify the user name. Range: Up to 32 characters Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - USER SETTING - USER NAME Specify the fax number.
  • Page 149 Clear button Reception Operation Item Memory RX Mode Number of Rings Epson AcuLaser CX37 Series Description Select whether or not the transmission information (date sent, sender's name, fax number, etc.) is printed on sent faxes. Choices: On, Off Default: On...
  • Page 150 UTILITY - FAX RX OPERATION - FORWARD Forward Address Specify the forwarding address for fax or e-mail. Range: Up to 50 characters (Fax), 64 characters (E-mail) Configuration Menu Equivalent: UTILITY - FAX RX OPERATION - FORWARD Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...

  • Page 151: Communication Setting

    Select Tray Duplex Print Apply button Clear button Communication Setting Item Tone/Pulse Epson AcuLaser CX37 Series Description Select whether or not the footer is printed. Choices: On, Off Default: Off Configuration Menu Equivalent: UTILITY - FAX RX OPERATION - FOOTER This parameter can be used to select which paper trays can be used to supply paper when printing received documents or transmission reports.
  • Page 152 PSTN/PBX Apply button Clear button Reporting Item Activity Report Epson AcuLaser CX37 Series Description Select the volume of the monitoring sound of the transmission signal. Choices: High, Low, Off Default: Low Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - COMM. SETTING - LINE MONITOR...

  • Page 153: User Setting

    Clear button User Setting Item Fax PTT Setting Epson AcuLaser CX37 Series Description Select whether or not a report showing the results of a transmission is printed automatically after the transmission is finished. If On is selected, a report is printed after each transmission is finished.

  • Page 154: Downloading/Uploading Destination List

    Downloading/Uploading Destination List In the Scan - Downloading/Uploading Destination List window, the destination information can be downloaded or uploaded. Item Download Epson AcuLaser CX37 Series Description Select the date display format for reports and lists. Choices: MM/DD/YY, DD/MM/YY, YY/MM/DD Default: MM/DD/YY Configuration Menu Equivalent: UTILITY - ADMIN.

  • Page 155: Network Page

    Select whether or not LPD is used. Choices: Enable, Disable Default: Enable Epson AcuLaser CX37 Series Description Click Browse button to display the dialog box for browsing to the folder where the file containing the machine settings was saved. Specify the location of the file containing the destinations, and then click the Apply button to write the destinations to the machine.

  • Page 156: Ipv4 Settings

    If the specified IP address is outside of the allowable range, the value is not changed, even after the Apply button is clicked. The setting returns to the previous value. Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - IP ADDR. SETTING Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...

  • Page 157: Ipv6 Settings

    Always enter these addresses without leading zeros. For example, 131.011.010.001 should be entered as 131.11.10.1. IPv6 Settings For more information on these TCP/IP, see Chapter 5 “Network Printing” on page 61. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 158 Default: Enable DNS Server Automatic Select whether or not the DNS server address is automatically acquired from the DHCPv6 Acquisition server to overwrite the current setting. Choices: Enable, Disable Default: Enable Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 159 UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - RAW PORT - BIDIRECTIONAL Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 160 ❏ If the range of permitted IP addresses in Access Permission Address overlaps the range of refused IP address in Access Refuse Address, the refuse setting of Access Refuse Address is given priority. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 161 IP address or the ending IP address. ❏ If the starting IP address is larger than the ending IP address, the setting is not applied. Apply button Applies the configuration settings in this page. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 162 Default: 28800 IKE Diffie-Hellman Group Selects IKE Diffie-Hellman Group. Choices: Group1, Group2 Default: Group2 Epson AcuLaser CX37 Series Description Displays whether to enable or disable the IPsec function. Display the IKE Life Time. Display the IKE Diffie-Hellman Group. Display the IPsec SA Life Time.
  • Page 163 Choices: AH, ESP, ESP & AH Default: AH Encryption Algorithm for When ESP is selected for Security Protocol, specify the ESP encryption algorithm. Choices: None, DES-CBC, 3DES-CBC, AES-CBC, AES-CTR Default: None Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 164 Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Cancel button Click to cancel the entered data and return to the Network - TCP/IP - IPsec page. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 165 Specify the address of the LDAP server. IPv4 address or FQDN (Fully Qualified Domain Name) can be specified. Range: Up to 64 characters Default: 0.0.0.0 Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - LDAP SERVER ADDR. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 166 UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - SEARCH METHOD Timeout Specify the maximum wait time during a search. Range: 5 to 300 Default: 60 Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - LDAP TIMEOUT Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 167 Specify the necessary domain name used to connect to the LDAP server. Range: Up to 64 characters Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - DOMAIN NAME Apply button Applies the configuration settings in this window. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 168 Displays the device information. Note: Specify the settings from the System - Machine Settings page. Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 169 NetWare NetWare Item NetWare NetWare Print Frame Type Mode Epson AcuLaser CX37 Series Description Enables or Disables the NetWare print option. Choices: Enable, Disable Default: Disable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - NETWARE Specifies the Frame Type.
  • Page 170 Preferred NDS Tree Name NPrinter/RPrinter Printer Name Printer Number Apply button Epson AcuLaser CX37 Series Description Sets the Print Server Name for the printer. Range: 1 to 63 bytes Default: AL-CX37-xxxxxx Note: xxxxxx displays six last digits of the MAC address in hexadecimals.
  • Page 171 Item IPP Print Accept IPP Job Printer Name Printer Location Printer Information Epson AcuLaser CX37 Series Description Resets all configuration settings to previous values. Description Identifies current NetWare file server. Identifies current NetWare queue name. Identifies current NetWare status.
  • Page 172 Operational Support Print Job Validate Job Cancel Job Get Job Attributes Get Jobs Get Print Attributes IPP Authentication User Name Password Epson AcuLaser CX37 Series Description Displays the printer’s Uniform Resource Identifier (URI). ❏ http://<IP_address>/ipp ❏ http://FQDN:/ipp ❏ ipp://<IP_address>/ipp ❏...
  • Page 173 Apply button Clear button Client Item Send Proxy Server Epson AcuLaser CX37 Series Description Specify the realm used with Basic or Digest authentication. Range: 1 to 127 bytes Default: IPP Applies the configuration settings for this window. Resets all configuration settings to previous values.
  • Page 174 Select the amount of time (in seconds) until the connection with the FTP server times out. Choices: 5 to 300 Default: 60 Apply button Applies the configuration settings in this window. Clear button Resets all configuration settings to previous values. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 175 SNMP v1/ Read Community v2c(IP) Name Write Write Community Name Epson AcuLaser CX37 Series Description If Enable is selected, SNMP is enabled. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - SNMP If Enable is selected, SNMP v1/v2c(IP) is enabled.
  • Page 176 Specifies the security level for read only user. Level Choices: None, Auth-password, Auth-password/Priv-password Default: Auth-password/Priv-password Read Specifies the read only user authentication password to be used for Auth-password authentication. Range: 8 to 32 bytes Default: AuthPassword Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 177 Range: 8 to 32 bytes Default: <Mac address>(excluding colons) Encryption Select an encryption algorithm. Algorithm Choices: DES, AES-128 Default: DES Authentication Select an authentication method. Method Choices: MD5, SHA-1 Default: MD5 Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 178 Printer Name Zone Name Current Zone Name Apply button Clear button Epson AcuLaser CX37 Series Description Specifies whether or not to permit the Trap settings Choices: Allow, Restrict Default: Allow Specifies whether to enable or disable the Trap settings when authentication failed.
  • Page 179 Scan Sending E-mail Address Sender Name Default Subject SMTP Server Address Epson AcuLaser CX37 Series Description If Enable is selected, sending Email is enabled. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - SMTP If Enable is selected, scan sending is enabled.
  • Page 180 Type in the account name used for POP3 server. Range: Up to 63 characters Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - E-MAIL SETTING - POP BEFORE SMTP - POP3 ACCOUNT Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 181 Use alphanumeric characters (including some symbols) for the Sender Name and Default Subject. Using other characters will corrupt the characters for the E-mail destination. For details on characters that can be entered, refer to the Printer/Copier/Scanner User’s Guide. Epson AcuLaser CX37 Series Description Type in the password used for POP3 server.
  • Page 182 Clear button Direct Hosting Settings Item Direct Hosting Settings Apply button Clear button Epson AcuLaser CX37 Series Description If Enable is selected, SMB transmission is enabled. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - SMB Select the version of NTLM Setting.

  • Page 183: Ssl/Tls Information

    Set a Encryption Strength Remove a Certificate Mode Using SSL/TLS Next button Cancel button Epson AcuLaser CX37 Series Description Displays the SSL/TLS Setting page. Description Creates a self-signed certificate. Creates data for requesting that a certificate be issued from a certificate authority.

  • Page 184: Self-Signed Certificate Setting

    Validity Start Date Validity Period Encryption Strength Epson AcuLaser CX37 Series Description Identifies the Common Name for the printer, to be used in creation of an SSL Certificate. It is comprised of “Printer Host Name. DNS Server”. If DNS Server is un-available, only the host name is used as Common Name.

  • Page 185: Request A Certificate

    State/Province Country Email Address Next button Back button Epson AcuLaser CX37 Series Description Creates the self-signed certificate. Note: A few minutes are needed in order to create the certificate. When the message “To help protect your security, Internet Explorer has blocked this website from displaying content with security certificate errors.

  • Page 186: Encryption Strength Setting

    Encryption Strength Setting Note: This menu item appears if a certificate is installed. Item Encryption Strength Epson AcuLaser CX37 Series Description Click to cancel the entered data and return to the Network - SSL/TLS - SSL/TLS Information page. Description Displays the data that should be submitted to the certificate signing authority.
  • Page 187 Mode Using SSL/TLS Apply button Clear button Back button Cancel button Epson AcuLaser CX37 Series Description Click to specify the encryption level. If the Network - SSL/TLS - Install a Certificate page was previously displayed, the certificate is installed. Returns to the previous screen.

  • Page 188: Auto Logout

    Item Admin Mode Logout Time User Mode Logout Time Apply button Clear button Epson AcuLaser CX37 Series Description Select whether or not user authentication is performed. Choices: On, Off Default: Off Select whether or not logon as a Public user is permitted when authentication settings have been specified.
  • Page 189 EAP Type User ID Password TTLS Anonymous Name TTLS Authentication Type Server Certificate Check Epson AcuLaser CX37 Series Description Select whether to enable or disable the IEEE802.1x function. Choices: Enable, Disable Default: Disable Configuration Menu Equivalent: UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - IEEE802.1X Select the type of authentication used with IEEE802.1x.

  • Page 190: Ca Certificate Information

    Note: As a default, CA Certificate is not installed. Click Setting to create a certificate and specify the CA Certificate settings. Epson AcuLaser CX37 Series Description Select whether or not the client certificate is sent when the client certificate is requested by the server.
  • Page 191 Next button Back button Cancel button Remove a Certificate Item OK button Epson AcuLaser CX37 Series Description Displays the CA Certificate Settings page. Description Removes the certificate. Click to display the selected page. Click to cancel the entered data and return to the Network - Authentication - CA Certificate - CA Certificate Information page.
  • Page 192 Click to return to the Network - Authentication - CA Certificate - CA Certificate Settings page. Cancel button Click to return to the Network - Authentication - CA Certificate - CA Certificate Information page. Epson AcuLaser CX37 Series Reference Guide Using Web-Based EpsonNet Config...
  • Page 193 E-mail destination...140 Encryption strength setting...186 Fax Configuration...147 Fax destination...140 FTP...173 Group dial list...138 Group dial registration...147 Group Dial Setting...146 Epson AcuLaser CX37 Series Install a Certificate...186 LDAP search...141 LLTD...169 Mode Using SSL/TLS...187 NetWare...169 Remove a Certificate...187 Request a Certificate...185 Self-signed certificate setting...184 SNMP...175...
  • Page 194 Install a Certificate, Web-Based EpsonNet Config ...186, 191 Installing Certificate...186, 191 LSP...43 Printer driver...27 IP address...53, 62 Epson AcuLaser CX37 Series Manual setting...62 IP address filtering, Web-Based EpsonNet Config...160 IPP...56 Printing via...63 IPP, Web-Based EpsonNet Config...56, 171 IPsec Peer settings, Web-Based EpsonNet Config...164 IPsec SA Settings, Web-Based EpsonNet Config...163...
  • Page 195 Form overlay...99, 136 General settings...93, 121 Local interface...121 Paper source settings...94, 123 PCL font...98 PCL settings...95, 127 Epson AcuLaser CX37 Series Print quality settings...97, 130 PS font...99, 135 PS settings...96, 128 Report types...99 Tray mapping settings...95, 126 XPS settings...96, 129 Printer name...78...
  • Page 196 Authentication...107, 108 , 188 Auto Logout...188 Bonjour...165 CA certificate information...190 CA certificate setting...191 Certificate request...186 Clear settings...115 Epson AcuLaser CX37 Series Color profile...99, 137 Consumables and Maintenance Parts...89, 105 Counter...89, 105 Current status...83 Date/Time...110 Default permission settings...107, 108 Device information...85, 102 Direct print...100...
  • Page 197 Tray mapping settings...95, 126 User authentication...90, 188 User information...107 User password change...90 User registration...108 Viewing printer status...85 Window...82 WSD...168 XPS settings...96, 129 Printing via...66 WSD, Web-Based EpsonNet Config...168 XPS settings, Web-Based EpsonNet Config...96, 129 Epson AcuLaser CX37 Series Reference Guide Index...

This manual is also suitable for:

Aculaser cx37 series

Table of Contents