Using Bindery Print Server (Netware 3.1X/4.1X); Configuring For Netware Using Epsonnet Winassist - Epson aculaser c2000 Administrator's Manual

Using Bindery Print Server (NetWare 3.1x/4.1x)

This section contains instructions on using the Internal Print
Server in Print Server mode under NetWare 3.1x and 4.1x with
Bindery emulation.
Configuring for NetWare using EpsonNet
WinAssist
Configure the Internal Print Server using EpsonNet WinAssist.
Note:
Novell Client32 or Novell IntranetWare Client must be installed in your
computer. Do not use Novell Client for Windows 95/98 version 3.00 or
Novell Client for Windows NT version 4.50.
1. Turn on the printer.
2. From any NetWare client, log in to the target NetWare server
with supervisor privileges. You must log in with bindery
connection.
3. Run EpsonNet WinAssist from the Start menu.
4. Click IPX. Select the printer you want to configure from the
list, then click Configuration .
3-6
Settings for NetWare