Requirements; When Connecting With Windows Server 2008/Server 2008 R2 - Epson AcuLaser CX37DN Series Reference Manual

In addition, the language can be selected from the Language drop-down list in Web-Based EpsonNet
Config. For details, refer to "Language Setting" on page 84.

Requirements

To use Web-Based EpsonNet Config, the following is required:
❏ Windows Server 2008/Server 2008 R2/Server 2003/7/Vista/XP
Mac OS X 10.3.9 or later
Red Hat Enterprise Linux 5, SUSE Linux Enterprise 5
❏ Microsoft Internet Explorer version 6.0 or later
Mozilla Firefox version 3.0 or later
Note:
You do not need an Internet connection.
❏ TCP/IP communication software (used by Web-Based EpsonNet Config) installed on your PC
❏ A network, to which both your PC and the printer are connected
Note:
You cannot access Web-Based EpsonNet Config using a local (USB) connection.

When connecting with Windows Server 2008/Server 2008 R2

When Web-Based EpsonNet Config is started on a computer running Windows Server 2008/Server
2008 R2, only the System tab may appear, and the Job, Print and Network tabs may not. In this case,
Java must be installed, and the security settings must be specified according to the following
procedure.
Note:
Before using Web-Based EpsonNet Config, be sure to close all Internet Explorer windows.
1. Click the Start button.
2. Point to Administrative Tools, and then click Server Manager.
Note:
If the User Account Control dialog box appears, click the Continue button or the Yes.
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
77