Admin Password; Save Settings - Epson AcuLaser CX37DN Series Reference Manual

Admin Password

Item
Current Password
New Password
Retype New Password
Apply button
Clear button
Note:
If you forget the new password you've assigned, contact Technical Support.

Save Settings

From the System - Save Settings window, the machine settings can be saved as a file on the computer
being used. In addition, the saved settings file can be read by the machine.
Note:
The following settings are not saved in the file:
❏ Phone books
Item
Save Settings Device Setting
Description
Type in the current password.
Range: Up to 16 bytes
Sets a new password to enter Administrator Mode.
Range: Up to 16 bytes
Note:
Passwords can be set to any string of numbers and letters (uppercase and
lowercase) up to 16 characters in length.
Verifies the new password typed in the New Password text box.
Range: Up to 16 bytes
Note:
If the password typed in three text boxes doesn't match, the following message
displays when you choose the Apply button: "Password was changed
unsuccessfully. Please retry." Click OK button, and then retype the passwords in
both text boxes.
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
Description
Click Save button to save the machine settings as a file.
Epson AcuLaser CX37 Series
Using Web-Based EpsonNet Config
Reference Guide
112