Advertisement
Fuses in the engine compartment of
the engine compartment
Note
and
at the beginning of this chapter
on page 252.
Fig. 191 In the engine compartment: fuse box
cover with plastic clip
1
Open
the
fuse
compartment.
– Opening the engine compartment
p. 266.
→
– Press the lock in the direction of the arrow
fig. 191
, to unlock the fuse box cover.
1
→
– Remove the cover from the top.
– For installation, place the cover over the fuse
box and press it down until the cover locks
audibly on both sides.
On the inside of the fuse box cover in the
engine compartment there is a plastic clip
Fig. 191
for removing the fuses.
NOTICE
● Carefully remove the covers from the
fuse boxes and reinstall correctly
to prevent damage to the vehicle.
● Open fuse boxes must be protected from damage. F5
The fuse boxes must be protected against
the penetration of impurities and moisture.
Contamination and moisture in the fuse boxes
can cause damage to the system.
electric.
256
Instruction manual
.
2
box
in
the
engine
cover
2
Fuse box in engine compartment
Note
and
at the beginning of this chapter
on page 252.
Fig. 192 In the engine compartment: Fuse
arrangement.
Some of the fuses listed may be version-
specific.
→
Below are the locations with their respective
functions for the equipment that may be
available for your vehicle:
F1 Engine control unit
F2
Fuel metering valve / Water pump
F3
Pre-catalyst lambda sensor / Post-
catalyst lambda sensor
F4
Fuel pump
Radiator fan - electronic / Oil pressure
control valve / Variable control shaft -
intake / Variable control shaft - exhaust /
Activated carbon filter valve / Ethanol
sensor
Ignition coil
F6
Vacuum pump
F7
Advertisement
