Advertisement
Combined instrument
Introduction to the topic
Depending on the vehicle version, it may be
equipped with a combined analogue or digital
instrument (Active Info Display).
After starting the engine with the vehicle's
battery fully discharged or with a battery-
operated bat-
system configurations (co-ordination of the system, etc.).
The settings (e.g. time, comfort settings and
programs) can be deprogrammed or deleted.
The settings should be tested and corrected
after the vehicle's battery has been sufficiently
recharged.
Analogue combined instrument
Please note
at the beginning of this chapter on page 15.
Fig. 9 Analogue combined instrument on the instrument panel.
Some of the controls and functions depicted
here pertain to specific models and ver-
sions or are optional.
Explanations of the instruments and
Tachometer (revolutions x 1000 per minute
1
of the running engine)
)
Clock setting key1
2
Display indicators
3
→
1)
Depending on the vehicle version, the clock can also be set via the settings menu in the radio display.
fig.
9:
→
page 17.
→
p. 23.
→
p. 19.
WARNING
Driver distraction can lead to accidents and
injuries.
● Never operate the buttons of the combined
instrument while driving.
● Make all settings of the display indicators of
the combined instrument display and the
display on the radio system only when the
vehicle is stationary in order to reduce the
risk of accidents and injuries.
Button for zeroing or trip odometer display.
4
- Press the key
The odometer shall be reset to zero within 2
seconds.
Speedometer (speedometer).
5
Fuel level indicator
6
p. 17.
→
Coolant temperature indicator
7
engine's engine
p. 18
→
Information for the driver
for approximately
15
Advertisement
