Optional Boss-N1 Module; Removing The Boss-N1 Module Blank - Dell PowerEdge R860 Installation And Service Manual

Figure 130. Connecting the VGA port cable
Next steps
1. Install the air shroud.
2. Follow the procedure listed in

Optional BOSS-N1 module

Removing the BOSS-N1 module blank

Remove the BOSS-N1 module blank from the Riser 1.
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
Use a screwdriver to push out the blank from the BOSS-N1 module bay.
After working inside your
Safety instructions.
Before working inside your
system.
system.
Installing and removing system components 163