Optional BOSS-N1 module
Removing the BOSS-N1 module blank
Prerequisites
Follow the safety guidelines listed in the
Safety
instructions.
Steps
Use a screwdriver to push out the blank from the BOSS-N1 module bay.
Figure 177. Removing the BOSS-N1 module blank
Next steps
1.
Replace the BOSS-N1 module blank
or
install BOSS-N1
module.
Installing the BOSS-N1 module blank
Prerequisites
1. Follow the safety guidelines listed in the
Safety
instructions.
Steps
Align the blank with the BOSS-N1 module bay and push it into the bay until it clicks into place.
ss
226
Installing and removing system components