Table of Contents
Advertisement
4.
5.
Electrocution hazard – risk of death, serious personal injury, and/or damage to
the device
Make sure the supplied safety cover is always installed before the device is powered.
6.
2.5.3.1
Wiring examples
The following illustrate how to connect single and dual power supplies to the device.
RUGGEDCOM RST2428P
Equipment Manual, 10/2023, C79000-G8976-1528-01
Reinsert the terminal block plug into the device.
For European-style (Euroblock) terminal block plugs, use a slotted screwdriver to
tighten the captive screws.
1
European-style (Euroblock) terminal block plug
1
Screw-type terminal block plug
2
Figure 2.20
Assembling the power supply terminal block plug
Install the safety cover.
DANGER
1
2
Safety cover
1
Screw
2
Figure 2.21
Installing the safety cover
Connect the device to ground (Protective Earth).
For more information, refer to "Grounding the device" (Page 45).
Installing the device
2.5.3 Connecting main power
2
39
Advertisement
Table of Contents
