Table of Contents
Advertisement
reasonable protection against harmful interference when the equipment is operated
in a commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case users will be required to
correct the interference at their own expense.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this device.
6.1.6
ISED
This device is declared by Siemens Canada Ltd. to meet the requirements of the
following ISED (Innovation Science and Economic Development Canada) standard:
•
6.1.7
ISO
This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
•
6.1.8
ACMA
This device meets the requirements of the following Australian Communications and
Media Authority (ACMA) standards under certificate ABN 98 004 347 880:
•
•
•
•
The device is marked with an RCM symbol to indicate compliance when sold in the
Australian region.
RUGGEDCOM RST2428P
Equipment Manual, 10/2023, C79000-G8976-1528-01
NOTICE
CAN ICES-3 (A)/NMB-3 (A)
ISO 9001:2015
Quality management systems – Requirements
Radiocommunications (Compliance Labeling – Devices) Notice 2014 made under
section 182 of the Radiocommunications Act 1992
Radiocommunications Labeling (Electromagnetic Compatibility) Notice 2017
made under section 182 of the Radiocommunications Act 1992
Radiocommunications (Compliance Labeling – Electromagnetic Radiation) Notice
2014 made under section 182 of the Radiocommunications Act 1992
Telecommunications (Labeling Notice for Customer Equipment and Customer
Cabling) Instrument 2015 made under section 407 of the Telecommunication
Act 1997
Certification
6.1.6 ISED
69
Advertisement
Table of Contents
