2.5.3 Wiring Examples - Siemens SIMATIC NET RUGGEDCOM RST916P Equipment Manual

Installing the Device
2.5.3 Wiring Examples
8.
2.5.3 Wiring Examples
The following illustrate how to connect single and dual power supplies to the device.
Figure 2.10
18
M4 Screw
1
M4 Ring Tongue
2
Figure 2.9 Chassis Ground Connection
Connect the external power supply to a power source. The Power LED on the
device will turn green when the device has booted up, indicating power is being
supplied to the device.
Single DC Power Input
Configuration
1
2
Figure 2.11 Dual DC Power Input
Configuration
Equipment Manual, 11/2023, C79000-G8976-1489-06
RUGGEDCOM RST916P