Host Settings - Fuji Xerox DocuPint C2090 FS User Manual

Table of Contents

Advertisement

3. Press <Set> and use the <◄/►> to find [FAX Config – Dial Type].
4. Press <Set> the LCD showns [Dial Type – Tone].
5. Use the <◄/►> buttons to select Tone / Pulse.
6. Press <Set> to confirm your setting
To specify the setting for the Accumulate Doc, do the following:
1. Execute [Print List] to get detail job information.
2. Using [Print Document] or [Delete Document] to process and follow job.
Note:
Accumulate Doc means received document caused printer or paper size incorrect and can not success
to printing immediately. You can accumulate received data first and print it at later.
To specify the setting for Print List, do the following:
1. Press <Menu> and the LCD shows [FAX Report – Accumulate Doc]
2. Press <Set> and use the <◄/►> to find LCD shows [Accumulate Doc – Print list]
3. Press <Set> to confirm you setting and get list.
o specify the setting for Print Document, do the following:
1. Press <Menu> and the LCD shows [FAX Report – Accumulate Doc]
2. Press <Set> and the LCD shows [Accumulate Doc – Print Document]
3. Press ,<Set> and LCD shows [Print Document – XX List No ] (XX: 1-99)
4. Press <Set> to confirm your setting.
Note:
If XX code incorrect or not set by [Print List] or selected XX be deleted, DocuPrint C2090FS will not
have any action or alarm or sending error message. And LCD shows [Set FAX Num Std - _ _ _ _ _ _ _
_ _].

8.6 Host settings

You can specify Host settings for Ethernet, TCP/IP, Protocol, or IP Filter under the host settings submenu.
To specify the network setting through Ethernet connection, do the following:
1.
Press the <Menu> button on the control panel. Use the <▼> buttons to select [Configuration Need
Password] and press <Set>.
2.
Use the <◄/►> buttons to select [Network Config - Network] and press <Set>.
3.
Use the <◄/►> buttons to select [Network Config - Ethernet] and press <Set>.
4.
Use the <◄/►> buttons to select [Auto select], [10Base Half], [10Base Full], [100Base Half], or
[100Base Full].
5.
Press <Set> to confirm.
To specify the TCP/IP setting, do the following:
All manuals and user guides at all-guides.com
- 78 -

Advertisement

Table of Contents
loading

Table of Contents