Fuji Xerox DocuPint C2090 FS User Manual page 10

Laser Printer Precautions
The DocuPrint C2090 FS utilizes laser technology. Follow the precautions below to ensure safe, efficient
operation.
Unless specifically instructed in the manual, be careful not to touch the fuser, which
is marked CAUTION HOT SURFACE. If you have been using the DocuPrint C2090
FS for an extended period of time, the fuser may be very hot.
Do not attempt to modify or not to disassemble the toner cartridge. It cannot be
refilled.
Do not touch the toner and avoid contact with your eyes.
Do not use a vacuum cleaner if the toner is spilled. Use a broom and dustpan or a
damp cloth with soap and water to clean up. Because the fine particles in the toner
cartridge can cause a fire or an explosion if they come into contact with a spark.
Do not dispose of used toner cartridges or fuser in fire. Doing so may cause fire and
injury. Dispose of them according to local regulations.
Do not unplug or reconnect the machine while it is on. Unplugging a live connector
can deform the plug and cause a fire.
When unplugging the machine, grasp the plug instead of the cord. Forcibly pulling
on a cord can damage it and cause fire or electric shock.
Be sure to switch off and unplug the machine before accessing the interior of the
machine for cleaning, maintenance, or fault clearance. Access to a live machine's
interior can cause electric shock.
When the machine is not used over an extended period of time, switch it off and
unplug it. If an unused machine is left connected to power for a long time, degraded
insulation can cause electric shock, current leakage, or fire.
All manuals and user guides at all-guides.com
- 10 -