File - Fuji Xerox DocuPint C2090 FS User Manual

8.10.4 File

Save scanned images in with using the function. Under operations you can also perform this operation from
the keyboard of the FujiXerox Docuprint C2090FS. Please refer to section 5.2 for more information.
On the keyboard of FujiXerox DocuPrint C2090 FS, the functions [To PC (USB)] of MFP will also apply this
function for process via USB port. You can refer "5.2 Scanning an image" section for this function.
[Scan source]
[Scan source] is allows the user to select the document source from the [Document Glass] or [Auto
Document Feeder]. Check the flatbed glass and remove any document on it before you want to scan from
the [Auto Document Feeder].
[Scan mode]
[Scan mode] allows you to select either color, black & white or black & white enhanced scans. Black
and white scans will be smaller in terms of file size.
[Scan mode] determines the amount of color information collected from your origin; your choice also
influences the output image size. Color mode creates the largest image size, while black & white mode
creates the smallest ones.
[Image Quality]
[Image Quality] determines the amount of detail collected from an original. There are pre-defined
options (75, 100, 150, 200, 300, 400, 600 dpi) and Custom options. If custom option is selected, a dialog will
pop up for you to fill in the specified resolution between 75 and 600. Select a value based on the purpose of
your scan.
[Paper size]
Choose the document size as your scan region; each document size is supported by both scan sources,
[Document Glass] or [Auto Document Feeder]
[Multiple page scan]
For [Multiple page scan], if this option is checked, a message box appears asking for placement of the
next page to be scanned (only applicable if [Document Glass] is the selected Scan Source).
[File name]
All manuals and user guides at all-guides.com
- 93 -