Fuji Xerox DocuPint C2090 FS User Manual page 77

1. Press <FAX> then <Menu> button, use the <▼> buttons to select [ Configuration – Need
Password] function.Press <Set> and input the password to enter [Configuration-FAX].
2. Press <Set> and input password press <Set> to enter into [Configuration - FAX]
3. Press <Set> to enter [FAX Config]
4. Use the <◄/►> to select [FAX Config –Redial Attempt].
5. Press <Set> and the LCD shows [Redail Attempt - ◄ XX ► (0-9) ]
6. Use the <◄/►> buttons to adjust the value from 0 to 9.
7. Press <Set> to confirm.
Notes:
• If selected the volume to 0, it will not redial when sending fax fail.
• Default setting value is 7.
To specify the setting for FAX
Press <FAX> then <Menu> button, use the <▼> buttons to select [ Configuration – Need
1.
Password] function.Press <Set> and input the password to enter [Configuration-FAX].
Press <Set> and input password press <Set> to enter into [Configuration - FAX]
2.
Press <Set> and the LCD shows [FAX Config –FAX Header].
3.
Use the <◄/►> buttons to select [FAX Header - ◄ Off | On ► ] press <Set>.
4.
Use the <◄/►> buttons to turn the Fax header on/off.
5.
Press <Set> to confirm your setting
6.
Note:
• Default setting is Off. .
To specify the setting for Junk Block, do the following:
1. Press <FAX> then <Menu> button, use the <▼> buttons to select [ Configuration – Need
Password] function.Press <Set> and input the password to enter [Configuration-FAX].
2. Press <Set> and input password press <Set> to enter into [Configuration - FAX]
3. Press <Set> and use the <◄/►> to find [FAX Config – Junk Block].
4. Press <Set> the LCD showns [Junk Block - ◄ Off | On ► ] press <Set>.
5. Use the <◄/►> buttons to turn the Junk block on/off.
6. Press <Set> to confirm your setting
Note:
• Default setting is Off.
To specify the setting for Dial Type, do the following:
1. Press <FAX> then <Menu> button, use the <▼> buttons to select [ Configuration – Need
Password] function.Press <Set> and input the password to enter [Configuration-FAX].
2. Press <Set> and input password press <Set> to enter into [Configuration - FAX]
All manuals and user guides at all-guides.com
Header, do the following:
- 77 -