Table of Contents
Advertisement
To specify special copy functions such as 2 in1(ADF Only>, Collate (ADF), Frame Erase, Back Remove, or
Image Shift, do the following:
1.
Press <Copy> then <Menu>
2.
Use the <◄/►> buttons to choose the special copy function desired:
•
2 in 1 (ADF only)
•
Collate (ADF)
•
Frame Erase removes frame when copying the document
•
Back Remove removes background when copying the document
•
Image Shift (none/center/left/right/up/down/shift value [1-50mm])
3.
Press the <Set> button and <◄/►> to setting selected function status and prese <Set> to confirm
your setting.
4.
Press the <▲> button to return to [READY] mode.
8.5 Fax settings
You can specify the settings for Dial type, Ring pattern, Line monitor, Redial attempt, Fax header, Junk
block and Call diag under this menu.
To specify the setting for Dial type, do the following:
1. Press <FAX> then <Menu> use the <▼> buttons to select [Configuration – Need password]
2. Preess <Set> and input password then press <Set> to enter into [Configuration - FAX]
2. Press <▼> and use the <◄/►> buttons to select [FAX Config -Dial type] and press <Set>.
3. Use the <◄/►> buttons to select [Tone] or [Pulse].
4. Press <Set> to confirm.
Note:
•
Tone delay function is support for Australia only.
To specify the setting for Line monitor, do the following:
1. Press <FAX> then <Menu> button, use the <▼> buttons to select [ Configuration – Need
Password] function.
2. Press <Set> and input password press <Set> to enter into [Configuration - FAX].
3. Press <Set> to enter into [FAX Config]
4. Use the <◄/►> buttons to select [FAX Config –Line Monitor].
5. Press <Set> and the LCD shows [Line Monitor - ◄ XX ► (0-3) ]
6. Use the <◄/►> buttons to adjust the volume ( 0: mute, 3: maximum volume)
7. Press <Set> to confirm your setting. .
To specify the setting for Redial attempt, do the following:
All manuals and user guides at all-guides.com
- 76 -
Advertisement
Table of Contents
