Enlarging/Reducing The Copy Size - Fuji Xerox DocuPint C2090 FS User Manual

5.
Press the <Set> button to confirm your setting.
6.
Press the <▲> button to return to [READY] mode.
To specify the sharpness of your copy, do the following:
1.
Make sure the DocuPrint C2090 FS is in Copy mode. If not, press the <Copy> button on the control
panel.
2.
Press the <Image Quality>.
3.
Use the <◄/►> buttons to choose [Sharpness] and press <Set>.
4.
Use the <◄/►> buttons to adjust the brightness of your copy.
5.
Press the <Set> button to confirm your setting.
6.
Press the <▲> button to return to [READY] mode.
To specify the color balance of your copy, do the following:
1.
Make sure the DocuPrint C2090 FS is in Copy mode. If not, press the <Copy> button on the control
panel.
2.
Press the <Image Qulity>
3.
Use the <◄/►> buttons to choose [Color Balance R] and press <Set>.
4.
Use the <◄/►> buttons to adjust the red color balance of your copy.
5.
Press the <Set> button to confirm your setting.
6.
Press the <▲> button to return to [READY] mode.
7.
Repeat steps 1 to 7 to adjust color balance for green and black.

6.5 Enlarging/Reducing the copy size

You can adjust the copy size by a specific zoom ratio or a specific percentage for enlargement or reduction
(25 to 400%). The default zoom ratio is set to 100%.
To adjust the copy size, do the following:
1.
Make sure the DocuPrint C2090 FS is in Copy mode. If not, press the <Copy> button on the control
panel.
2.
Press the <Reduce / Enlarge > button
3.
Use the <◄/►> buttons to adjust the zoom ratio of your copy. You can also use the numeric keypad
to enter a specific zoom percentage.
4.
Press <Set> to confirm your setting
5.
Press the <▲> button to return to [READY] mode.
All manuals and user guides at all-guides.com
- 61 -