8.10.1 Application
In the Scan images function, you can indicate an application to edit scanned image file and some scan
parameters of this function as follows:
[Scan source]
[Scan source] is allows the user to select the document source from the [Document Glass] or [Auto
Document Feeder]. Check the flatbed glass and remove any document on it before you want to scan from
the [Auto Document Feeder].
[Scan mode]
[Scan mode] allows you to select either color, black & white or black & white enhanced scans. Black and
white scans will be smaller in terms of file size.
[Image quality]
[Image quality] determines the amount of detail collected from an original. There are pre-defined
options (75, 100, 150, 200, 300, 400, 600 dpi) and Custom options. If [custom] option is selected, a dialog will
pop up for you to fill in the specified resolution between 75 and 600. Select a value based on the purpose of
your scan.
[Paper size]
Choose the document size as your scan region; each document size is supported by both scan sources,
[Document Glass] or [Auto Document Feeder]
[Multiple page scan]
For [Multiple page scan], if this option is checked, a message box appears asking for placement of the
next page to be scanned (only applicable if [Document Glass] is the selected Scan Source).
[Link scanned images to]
User may select an application target via [Set] icon that used for opening the scanned images after
scanning finished.
All manuals and user guides at all-guides.com
- 87 -