8. Advanced functions
This chapter explains how to configure settings for advance functions of the MFP.
8.1 Using the setup menu
You can use the menu to access a variety of submenus to customize settings for copying, faxing, scanning
and printing.
To access the setup menu, do the following:
1.
Make sure the DocuPrint C2090 FS is turned on, and then press the <Menu> button on the control
panel.
2.
The submenu is displayed on the LCD screen. Use the <▲/▼> buttons to select a submenu.
3.
Press the <◄/►> buttons to view items in a submenu.
4.
Press <Set> to confirm your setting.
5.
Press the <▲> button to return to [READY] mode.
8.2 Basic settings
You can specify the original size, original type and file type for printing.
To determine the original paper size to scan, do the following:
1.
Press <Scan> button then <Size / Type> and use the <◄/►> buttons to select function.
2.
Choose [Original size] and press <Set> to configure the settings.
3.
Choose the original size of the document to print.
Available document size:
•
A4, A5, B5
•
Postcard
•
8.5" x 11", 5.5" x 8.5", 7.25" x 10.5", 8.5" x 13", 8.5" x 14".
4.
Press <Set> to confirm your choice.
5.
Press the <▲> button to return to [READY] mode.
Note:
•
8.5" x 13", 8.5" x 14" selection only available when original paper present on ADF.
To determine the paper type to print, do the following:
1.
Press <Scan> button then <Size / Type>.
2.
Use the <◄/►> buttons to choose [Original type] and press the <Set> button.
3.
Choose the original type of the document to print. You can print from [Text], [Text & Photo], [Photo],
and [No Filter].
4.
Press the <Set> button to confirm your choice.
All manuals and user guides at all-guides.com
- 73 -