Fuji Xerox DocuPint C2090 FS User Manual page 177

Community Name (Read Only) (MAX. 31 x 1 byte characters)
Enter the community name used for reference and display. You can enter a maximum of 31
characters. The default is "public".
Community name that has been set will not be displayed on the screen.
Community Name (Read/Write) (MAX. 31 x 1 byte characters)
Enter the community names for reference, display and write. You can enter a maximum of 31
characters. The default is " fxSystemMgr ".
Community name that has been set will not be displayed on the screen.
Community Name (Trap Notification)
Enter the community name used trap. You can enter a maximum of 31 characters. The default is
NULL.
Community name that has been set will not be displayed on the screen.
HTTP
This page allows you to configure HTTP protocol settings for CentreWare Internet Services.
Port Number
Enter the port number that receives requests from the browser. The port number contains the
numbers 80 or 8000 to 9999.
The setting for this item will be valid only when the device is restarted. Click the [Apply New Settings
and Reboot Device] button to restart the device.
Maximum Sessions
Displays the number of connections received simultaneously by the browser.
Time-out
Enter the timeout interval when there is no response from the browser. The timer range is between 1
and 255 seconds.
FTP Client
This page allows you to configure the settings for FTP.
Connection Time-out
Specifies the time from the connect to the FTP server, failed connection until the connection is cut.
Enter the connection time-out period between 1 and 1000 second(s).
Data Transfer Time-Out
Specifies the time from the receiving of data, failed transmission of data until the connection is cut.
Enter the connection time-out period between 1 and 1000 second(s).
Control Panel Settings
Common Settings
System
Power Save Mode: Enable or disable the power save mode, options include [On], [Off]
Power Save Timer: Set the power save timer, options include 5, 10, 30, 60 minutes.
Menu Timeout Timer: Set menu timeout timer, options include 10, 20, 30, 60 seconds.
Warning Beep: Set the warming beep mode, [OFF], [High Volume], [Middle Volume], [Low
Volume]
Time: Set device time.
Date (yyyy/mm/dd): Set device date.
All manuals and user guides at all-guides.com
- 177 -