Table of Contents
Advertisement
7. Sending a fax
This chapter explains how to send fax copies and customize settings for fax tasks.
7.1 Placing the originals
You can either place originals on either the Auto Document Feeder (ADF) or on the document glass.
Before sending a fax, make sure the transportation lock on the back of the part B is set to the unlock position.
Always keep the document glass clean to prevent dirty or blurry images.
Notes:
•
Do not place heavy objects on the document glass or press it with too much force.
•
If you intend to fax documents with multiple sheets, using the ADF is recommended.
•
When using ADF to send Fax, please check and confirm there is not document paper place on
Document Glass firstly
To place the original on the document glass, do the following:
1. Open the document cover and place the original face-down on the document glass as shown. Use
the paper size marks on the left side of the document glass to position a document.
2. Close the document cover gently so that the original does not move.
To place the original on the Auto Document Feeder (ADF), do the following:
1. Slide the guides all the way outward.
2. Arrange your originals in order. The first page to copy should be on the top of the stack.
All manuals and user guides at all-guides.com
- 65 -
Advertisement
Table of Contents
