Fuji Xerox DocuPint C2090 FS User Manual page 62

Note:
• Pressing and holding the <Clear All> button resets settings for all modes.
To copy Std.size paper or Envelopes, do the followings
For standard size paper copy, do the followings,
1. Select a document size by control panel.
2. Select the paper size that you want to copy by control panel.
3. Set document on the document glass and align to arrow mark on the corner.
4. Load paper with the copy side facing up as below table and diagram shown.
For envelopes copy, do the followings,
1. Select A4 as a document size by control panel.
2. Select envelope size that you want to copy by control panel.
3. Set document or envelope on the document glass and align to arrow mark on the corner.
4. Load envelopes with the address side facing up as below table and diagram shown.
All manuals and user guides at all-guides.com
COPY MAGNIFICATION TABLE
Document
A5
A5 100%
B5 81%
A4 70%
- 62 -
Copy
B5 A4
122% 141%
100% 115%
86% 100%