Table of Contents
Advertisement
Press <Cancel> on progress window while scanner is scanning.
It can be also canceled from control panel, please refer to "Cancel a Scan job" section to
cancel the job.
8.9.4 Canceling an operation
Pressing the <Stop> button and <Set> to canceling and confirm the current processing job is the easiest and
quickest way. If the <Set> button is not pressed, the current processing job will not be canceled or deleted.
8.9.5 Fax stop & Fax cancel
To stop or cancel operating fax job that start and processing through by [PC FAX], [Network FAX] or
<numeric keypad / One-touch / Speed dial / Direct Fax >, you can stop Fax Job as follows steps,
1. Press <Stop>
2. LCD screen shows [Job canceling...- FAX ZZZZZZZZZ] or [Job canceling...- FAX
WWWWWWWWW]
•
ZZZZZZZZZ or WWWWWWWWW means operating fax number.
3. Press the <Set> button, then LCD screen shown [Set Fax Num Std - _ _ _ _ _ _ _ _ _] and fax
canceling process finished.
Notes:
•
If press <Stop> button, and machine beeper alarmed, it means no fax job under processing. So fax
canceling operation can not be executed.
•
Repeat process 1-3, you can continue to delete jobs that storage in the memory.
8.9.6 Fax Broadcast cancel
To stop or cancel fax broadcast operating, please follow bellows,
1. Press <Stop>
2. LCD screen shows [Job canceling...- FAX Broadcast]
3. Press the <Set> button, after few second the delete job finish and LCD screen shows [Set Fax Num
Std - _ _ _ _ _ _ _ _ _] then finish fax broadcast canceling.
Notes:
•
If press <Set> button, and machine beeper alarmed, it means no fax broadcast job under processing.
So fax canceling operation can not be executed.
All manuals and user guides at all-guides.com
- 85 -
Advertisement
Table of Contents
