Fayat Group CP1200 Instruction Manual page 78

1
Fig.: Drain plug
1- Drain plug
Fig. - Drain plug
1. Drain plug
Fig. – Engine compartment
1. Oil filter
Fig. – Engine compartment
1. Fuel filter
74
Loosen the hex nut, pull the hose out and release the oil drain
plug.
1. Let all the oil drain into the container and finish the
operation attach the drain plug back and attach the hose.
2. Then tighten the hex
Always fill with new oil. For correct grade oil information, refer
to the Lubricant specifications or the Engine Manual
Instructions. Fill according to the oil volume necessary to the
engine. Check the dipstick to know if the volume is correct and
before carrying out the operation, let the engine in idle for a few
minutes and turn it off.
Change the engine oil filter Diesel
The oil filter (1) is located close to the
Refer to the Engine Instructions Manual to obtain information
about the oil filter replacement.
1
Replace the filter and pre fuel filter
The fuel filter (1) is located right side of the
1
Refer to the engine manual for information on replacement fuel
filters.
4812325556EN
Scheduled maintenance
nut.
TAKE CARE OF THE ENVIRONMENT: All the
used oil shall be
subsequent disposal. Do not dispose of oil on
the ground, sewage system or other place
which can harm the environment.
Never perform any maintenance work under the
machine while the engine is still operating. Always
park the roller on a flat and safe place and chock
the tires.
Never perform any maintenance work under the
machine while the engine is still operating. Always
park the roller on a flat and safe place and chock
the tires.
properly stored for
radiators.
engine.
08/01/2023