Table of Contents
Advertisement
Fig.– Emergency brake
1.
Emergency brake
2.
Parking brake
Fig. – Engine oil level
1
Fig. – Expansion tank
1. Maximum
2. Minimum
08/01/2023
Make the machine move slowly. Hold the steering wheel and
brace yourself for a sudden stop.
Press the emergency brake button (1). The roller will stop
abruptly and the engine will shut
After testing the brakes, put the lever forward / reverse to
neutral and activate the parking brake (2).
Pull the emergency brake button out. Start the engine
The roller is now ready to work.
The oil dipstick is located under the oil filler plug on the left side
of the engine.
Place the machine on a flat surface, wait at least 15 minutes
after switching off the machine, and make sure the level is
between the marks H (high) and L (low).
2
The expansion tank is located in the upper left corner of the
engine access.
Make sure the cooling liquid level is between the MAX and MIN
marks the expansion tank. If necessary, remove the tank lid and
complete the
When filling the cooling liquid, always use a compound with
50% water and 50 % additive. See the specifications of
lubricants in this manual.
4812325556EN
Check operation of the emergency brake
Check the engine oil level
Never operate the machine with the oil level
below the L mark and above the mark H. Low
performance or engine damage may occur.
Check the level of engine coolant
level.
NEVER open the lid of the expansion tank when
the engine is hot and always wear gloves and
goggles.
Revision History
down.
67
Advertisement
Table of Contents
