Table of Contents
Advertisement
Fig. – Splash screen
Fig. – Status screen
Fig. – Main working screen
08/01/2023
Instrument/controls - Description and Function
Control panel – General Description
When the ignition key is in the position "I", the start screen is
visible on the display. It remains activated for a few seconds
(1.5 seconds) then it switches to the status screen.
The status screen provides information about the fuel level, the
sprinkler tank water level, the working hours and the voltage
level. The water and fuel levels are specified in percentage (%).
The screen remains visible until the Diesel engine is turned on
or if one of the function buttons below the screen is pressed.
If the engine starts before you choose the screen, it will switch
to the main screen.
This screen provides an overview and it remains on during the
operation:
- The speed is shown in the middle of the screen.
- The high/low speed mode is shown with a symbol in the
middle of the screen.
- The engine rpm, the asphalt temperature (option) and the tires
pressure (option) are shown in the upper left corner and in the
lower left corner, respectively.
4812325556EN
21
Advertisement
Table of Contents
