Table of Contents
Advertisement
2023-01-25
The machine's gear position is shown in the center of
the speedometer; select the gear/speed for the task.
The machine does not need to be stopped to change
gear position.
= Position 1
= Position 1
= Position 2
= Position 2
= Position 3
= Position 3
Carefully move the forward/reverse lever (2) forwards
or backwards, depending on which direction of travel
is required.
The speed increases as the lever is moved away from
the neutral position.
Interlock/Emergency stop/Parking brake -
Check
The interlock, emergency stop and parking brake must
The interlock, emergency stop and parking brake must
be checked daily before operating. A function check of
be checked daily before operating. A function check of
the interlock and emergency stop requires a restart.
the interlock and emergency stop requires a restart.
The interlock function is checked by the operator
The interlock function is checked by the operator
standing up from the seat when the roller is moving
standing up from the seat when the roller is moving
very slowly forwards/backwards. (Check in both
very slowly forwards/backwards. (Check in both
directions). Hold the steering wheel firmly and brace
directions). Hold the steering wheel firmly and brace
yourself for a sudden stop. A buzzer goes on and after
yourself for a sudden stop. A buzzer goes on and after
7 seconds the engine switches off and the brakes are
7 seconds the engine switches off and the brakes are
activated.
activated.
Check the function of the emergency stop by pressing
Check the function of the emergency stop by pressing
the emergency stop button when the roller is moving
the emergency stop button when the roller is moving
slowly forwards/backwards. (Check in both
slowly forwards/backwards. (Check in both
directions). Hold the steering wheel firmly and brace
directions). Hold the steering wheel firmly and brace
yourself for a sudden stop. The engine switches off
yourself for a sudden stop. The engine switches off
and the brakes are activated.
and the brakes are activated.
If a function error is detected when testing the
If a function error is detected when testing the
emergency stop, this should be replaced immediately.
emergency stop, this should be replaced immediately.
Check the function of the parking brake by activating
Check the function of the parking brake by activating
the parking brake when the roller is moving very
the parking brake when the roller is moving very
slowly forwards/backwards. (Check in both
slowly forwards/backwards. (Check in both
directions). Hold the steering wheel and brace yourself
directions). Hold the steering wheel and brace yourself
for a sudden stop when the brakes are activated. The
for a sudden stop when the brakes are activated. The
engine does not switch off.
engine does not switch off.
4812159901_D.pdf
Operation
Max. speed
Max. speed
6 km/h
6 km/h
3.8 mph
3.8 mph
8 km/h
8 km/h
5 mph
5 mph
12 km/h
12 km/h
7.5 mph
7.5 mph
73
Advertisement
Table of Contents
