Table of Contents
Advertisement
2
3
Fig. – Side panel
1.
Display
2.
Increase in the tire pressure
3.
Decrease in the tire pressure
1
Fig. – Scrapers adjustment
1.
Handle
2.
Snap ring
08/01/2023
Tire pressure adjustment (option)
1
The operator can vary the pressure during the operation with the
tire air pressure control. It can be variable adjusted with the keys
(2) and (3) on the keypad, within the interval from 240 kPa to
620 kPa (35 to 90 PSI) and can be reduced with the key (3). The
tire pressure level is shown in the lower left corner, on the
Display (1).
Scrapers adjustment
There are two models of scrapers, with and without cocoa mat.
2
The adjustment of the scrapers on the wheels is done by the
handle (1) of the support of the scrapers.
There are two positions of work and rest .
Adjust the snap rings (2) of the scrapers to control the pressure
applied to the wheels.
4812325556EN
When the tire pressure is at the maximum level (620
kPa) or at the minimum level (240 kPa), it will not be
possible to increase/decrease the pressure.
Operation
39
Advertisement
Table of Contents
