Table of Contents
Advertisement
50
Hydraulic oil reservoir
Fill the hydraulic reservoir until the uppermost level.
Tires
Make sure the tires pressure is at least 345kPa (50 PSI).
Jack up the frame, so that the tires do not take any
load.
Steering cylinder, hinges, etc.
Grease the steering cylinder plunger spindle to preserve it.
Also lubricate the hinges on the engine compartment and cab
doors.
Hoods, tarpaulin
Lower the instruments hood/covering over the instrument
panel.
Cover the entire roller with a tarpaulin. It shall have a gap
between it and the ground.
If possible, store the machine indoors and preferably in a place
with regular temperature.
When stopping and parking the equipment, always apply the
parking brake.
As a precaution measure, chock the roller tires when parking
on slopes and turn off the engine.
To prevent accidents, when parking on slopes,
stop transversally to the road towards the slope.
Never leave the roller with the engine running.
Before leaving it, apply the emergency/parking
brake.
Make sure the roller is parked in a safe place and
that it is not obstructing the traffic.
4812325556EN
Long-term storage
08/01/2023
Advertisement
Table of Contents
