Fayat Group CP1200 Instruction Manual page 6

2
General Information
This manual contains instructions to operate and
perform the maintenance of the machine.
The machine's maintenance shall be made correctly in
order to obtain the maximum performance and the
equipment shall also be kept clean, so leakage, loosen
bolts and connections can be found as soon as possible.
Perform a daily inspection in the machine before
starting, so you can find possible leakage or other
failures.
Verify the machine's floor. Leakages are easier detected
on the floor than on the equipment itself.
THINK ABOUT THE ENVIRONMENT! Do
not dispose oil, fuel or other hazard
substances to the environment. Always
dispose correctly used filters, draining oil
and fuel residues. Is prohibited dispose of
tires in the environment. Dispose of waste
tires at authorized collection points.
This manual contains
maintenance, which is usually performed by the
operator.
Other engine instructions can be found at the
manufacturer's manual.
CE Marking and Statement of Compliance
(APPLIED TO MACHINES SOLD WITHIN THE
EUROPEAN COMMUNITY)
This machine has a CE Marking. It shows that at its
delivery, it meets all the applicable health and safety
basic directives, according to 2006/42/EC Machinery
Directive, besides attending other directives applicable
on machinery.
Following the machine there is a "Statement of
Compliance" specifying the directive and supplement
applicable, as well as the harmonized norms and other
regulations relevant to the case.
4812325556EN
Introduction
instructions for periodic
08/01/2023