Interlock/Emergency Stop/Parking Brake - Check; Vibration; Manual Vibration - Switching On; Braking - Fayat Group Dynapac CC900G Instruction Manual

Fig. Forward/Reverse lever
4. Switch, vibration On/Off
2019-09-23
Interlock/Emergency stop/Parking brake -
Check
The interlock, emergency stop and parking brake must The interlock, emergency stop and parking brake must
be checked daily before operating. A function check of be checked daily before operating. A function check of
the interlock and emergency stop requires a restart. the interlock and emergency stop requires a restart.
The interlock function is checked by the operator The interlock function is checked by the operator
standing up from the seat when the roller is moving standing up from the seat when the roller is moving
very slowly forwards/backwards. (Check in both very slowly forwards/backwards. (Check in both
directions). Hold the steering wheel firmly and brace directions). Hold the steering wheel firmly and brace
yourself for a sudden stop. A buzzer goes on and after yourself for a sudden stop. A buzzer goes on and after
4 seconds the engine switches off and the brakes are 4 seconds the engine switches off and the brakes are
activated. activated.
Check the function of the emergency stop by pressing Check the function of the emergency stop by pressing
the emergency stop when the roller is moving slowly the emergency stop when the roller is moving slowly
forwards/backwards. (Check in both directions). Hold forwards/backwards. (Check in both directions). Hold
the steering wheel firmly and brace yourself for a the steering wheel firmly and brace yourself for a
sudden stop. The engine switches off and the brakes sudden stop. The engine switches off and the brakes
are activated. are activated.
Check the function of the parking brake by activating Check the function of the parking brake by activating
the parking brake when the roller is moving very the parking brake when the roller is moving very
slowly forwards/backwards. (Check in both slowly forwards/backwards. (Check in both
directions). Hold the steering wheel and brace yourself directions). Hold the steering wheel and brace yourself
for a sudden stop when the brakes are activated. The for a sudden stop when the brakes are activated. The
engine does not switch off. engine does not switch off.

Vibration

Manual vibration - Switching on

Vibration should not be active when the roller is Vibration should not be active when the roller is
stationary. This can damage both the surface and stationary. This can damage both the surface and
the machine. the machine.
Engage and disengage vibration using the switch (4)
on the underside of the forward/reverse lever.
Always switch off vibration before the roller comes to a
4
standstill.

Braking

4812163901_A.pdf
Operation
37