Table of Contents
Advertisement
2
1
Fig. – Paring brake test
1.
Parking brake
2.
Engine speed button
3.
Forward and reverse control
08/01/2023
Parking Brake Test
1-) The parking brake test must be done with the
parking brake switch button (1) engaged.
2-) Increase the engine to maximum rpm manually (2);
3-) Press and hold the Brake Test Button (3) and move
3
the joystick slowly to the maximum position forward or
reverse and verify if the equipment moves.
In case the machine speed goes higher than
1km/h within 3 seconds while executing the
dynamic or parking brake test, the roller will
automatically enter "Safe Mode"
The machine should be stopped and the
representative must be called immediately.
4812325556EN
Operation
47
Advertisement
Table of Contents
