Defining The Security Service; Restore Default Settings - Interlogix TruVision 4 IP Series Configuration Manual

Defining the security service

This function enables SSH and allows you to define its password. It is only used by
Technical Support.
Figure 21: Security service window
To enable the illegal login lock:
1. Click Configuration
2. Check the Enable Illegal Login Lock
3. Click Save to save the changes.
Note:
1. The IP address will be locked if the admin user performs 7 failed user
name/password attempts (10 attempts for the operator/user).
2. If the IP address is locked, you can try to login the device after 5 minutes
To define SSH:
1. Click Configuration
2. Check the Enable SSH
3. Click Save to save the changes.

Restore default settings

Use the Default menu to restore factory default settings to the camera. There are two
options available:
 Restore: Restore all the parameters, except the IP parameters, to the default
settings.
 Default: Restore all the parameters to the default settings.
TruVision Series 4 IP Camera Configuration Manual
> Security > Security
check box
> Security > Security
check box.
Service.
Service.
71