Interlogix TruVision 4 IP Series Configuration Manual page 22

Enable SSL: Check the checkbox to enable SSL if it is required by the SMTP
server.
Attached Snapshot: Check the checkbox of
send emails with attached alarm images.
Interval: This is the time between two actions of sending attached images.
Authentication: If your email server requires authentication, check this checkbox to
use authentication to log in to this server. Enter the login user name and password.
User Name: The user name to log in to the server where the images are uploaded.
Password: Enter the password.
Confirm: Confirm the password.
Receiver1: The name of the first user to be notified.
Receiver's Address1: The email address of the first user to be notified.
Receiver2: The name of the second user to be notified.
Receiver's Address2: The email address of the second user to be notified.
Receiver3: The name of the third user to be notified.
Receiver's Address3: The email address of the third user to be notified.
3. Click Test to test the email parameters.
4. Click Save to save changes.
To set up the NAT parameters:
1. Click Configuration
2. Check the checkbox to enable the NAT function.
3. Select Port Mapping Mode
you can configure an external port of your choice.
4. Click Save to save changes.
To set up the HTTPS parameters:
1. In the Network
20
> Network > NAT.
to be Auto or Manual. When you choose Manual mode,
folder, click the HTTPS
Attached Snapshot
tab to open its window.
TruVision Series 4 IP Camera Configuration Manual
if you want to