Video Image - Interlogix TruVision 4 IP Series Configuration Manual

To define Dual-VCA parameters:
1. In the Video/Audio
window.
2. Check the check box to enable Dual-VCA.
3. Click Save to save changes.
Target Cropping
You can specify a target area on the live video, and then the specified video area can
be displayed via the third stream in certain resolution, providing more details of the
target area if needed.
Note: Target cropping function varies according to different camera models.
To define Target Cropping:
1. Enter the Target Cropping settings interface.
2. Check Enable Target Cropping
3. Set Third Stream as the stream type.
4. Select the cropping resolution for the video display of target area. A red rectangle is
displayed on the live video to mark the target area, and you can click-and-drag the
rectangle to locate the target area as desired.
5. Click Save to save the settings.

Video image

You may need to adjust the camera image depending on the camera model or location
background in order to get the best image quality. You can adjust the brightness,
contrast, saturation, hue, and sharpness of the video image. See Figure 6 below.
Use this menu to also adjust camera behavior parameters such as exposure time, iris
mode, video standard, day/night mode, image flip, WDR, digital noise reduction, white
balance, and indoor/outdoor mode. See Figure 6 below for more information.
TruVision Series 4 IP Camera Configuration Manual
panel, click the Display Info. On Stream
checkbox to enable the function.
tab to open its
25