Camera Configuration; Configuration Menu Overview - Interlogix TruVision 4 IP Series Configuration Manual

Camera configuration

This chapter explains how to configure the cameras through a web browser.
Once the camera hardware has been installed, configure the camera's settings through
the web browser. You must have administrator rights in order to configure the cameras
over the internet.
The camera web browser lets you configure the camera remotely using your PC. Web
browser options may vary depending on camera model.
There are two main menus in the configuration panel:
 Local configuration
 Configuration

Configuration menu overview

Use the Configuration panel to configure the network, camera settings, alarms, users,
transactions and other parameters such as upgrading the firmware. See Figure 2 below
for descriptions of the configuration menus available.
Figure 2: Configuration window (Device Information tab selected)
Configuration menus
1. System
2. Network
3. Video/Audio
TruVision Series 4 IP Camera Configuration Manual
Description
Defines basic device information including SN, the current firmware
version, time settings, maintenance, and serial port parameters. See
"System time" on page 12 for further information.
Defines the parameters required to access the camera over a network.
See "Network settings" on page 13 for further information on the setup.
Defines recording parameters.
9