System Time - Interlogix TruVision 4 IP Series Configuration Manual

System time

NTP (Network Time Protocol) is a protocol for synchronizing the clocks of network
devices, such as IP cameras and computers. Connecting network devices to a
dedicated NTP time server ensures that they are all synchronized.
To define the system time and date:
1. From the menu toolbar, click
2. From the Time Zone
camera's location.
3. Under Time Sync, check one of the options for setting the time and date:
Synchronize with an NTP server: Check the
NTP address. The time interval can be set from 1 to 10080 minutes.
- or -
Set manually: Enable the
system time from the pop-up calendar.
Note: You can also check the
the time of the camera with the time of your computer.
4. Check Enable DST
date of the DST period.
5. Click Save to save changes.
12
Configuration
drop-down menu, select the time zone that corresponds to the
Manual Time Sync
Sync with computer time
to enable the DST (Daylight Savings Time) function, and set the
> System > Time Settings.
NTP enable box and enter the server
function and then click
checkbox to synchronize
TruVision Series 4 IP Camera Configuration Manual
to set the