Interlogix TruVision 4 IP Series Configuration Manual page 75

• Firmware directory: Locate the folder containing the firmware file. The camera
will choose the appropriate firmware file automatically.
• Firmware: Locate the firmware file manually for the camera.
4. Click Update. You will receive a prompt asking you to reboot the camera.
5. When the upgrade is finished, the device will reboot automatically. The browser will
also be refreshed.
To upgrade the firmware via TruVision Device Manager:
1. In the FW upgrader
multiple devices for simultaneous upgrading.
2. Click the browse button
If you want the device to automatically reboot after the upgrade, check
device after upgrading. When checked, it will also display
settings option. Check it if you want to restore all parameters.
3. Click Upgrade.
4. When the upgrading is completed, the updated version information on the devices is
listed.
TruVision Series 4 IP Camera Configuration Manual
panel, select a device or hold the Ctrl or Shift key to select
to locate the firmware file to use.
Reboot the
Restore default
73