Nas Settings - Interlogix TruVision 4 IP Series Configuration Manual

3. Select the desired format of the snapshot, such as JPEG.
4. Select the desired resolution and quality of the snapshot.
5. Enter the time interval between two snapshots. Select the unit of time from the drop-
down list: milliseconds or seconds.
6. Under Capture
7. Click Save to save changes.

NAS settings

You can use a network attached storage (NAS) device to remotely store recordings.
To configure recording settings, please ensure that you have the network storage
device within the network. The NAS disk should be available within the network and
correctly configured to store the recorded files, log files, etc.
Notes:
1. Cameras can record to up to eight NAS devices.
2. The recommended capacity of NAS is between 9G and 2T; other capacities may
cause a formatting failure.
Figure 22: NAS window
TruVision Series 4 IP Camera Configuration Manual
Number, enter the total number of snapshots that should be taken.
61