Interlogix TruVision 4 IP Series Configuration Manual page 21

directory; and when the Subdirectory is selected, you can use the Camera Name or
Camera No. as the name of the directory.
Upload Type: To enable uploading the snapshots to the FTP server.
4. Click Save to save changes.
To define the UPnP parameters:
1. Click Configuration
2. Check the checkbox to enable the UPnP function. The name of the device when
detected online can be edited.
3. Click Save to save changes.
To set up the email parameters:
1. In Configuration
2. Configure the following settings:
Sender: The name of the email sender.
Sender's Address: The email address of the sender.
SMTP Server: The SMTP Server, IP address or host name.
SMTP Port: The SMTP port. The default is 25.
TruVision Series 4 IP Camera Configuration Manual
> Network > UPnP.
> Network, click the Email tab to open its window.
19