Interlogix TruVision 4 IP Series Configuration Manual page 18

Menu tabs
11. NAT
12. HTTPS
To define the TCP/IP parameters:
1. From the menu toolbar, click
2. Configure the NIC settings, including the NIC Type, IPv4 settings, IPv6 settings,
MTU settings, and Multicast Address.
3. If a DHCP server is available, check DHCP.
4. If the DNS server settings are required for some applications (e.g., sending email),
you should configure the
5. Click Save to save changes.
To define the port parameters:
1. In Configuration
2. Set the HTTP port, RTSP port, HTTPS port and Server port of the camera.
HTTP Port: The default port number is 80, and it can be changed to any port No.
which is not occupied.
RTSP Port: The default port number is 554. It can be changed to any port number
in the range from 1 to 65535.
HTTPS Port: The default port number is 443. It can be changed to any port number
that is not occupied.
Server Port: The default server port number is 8000. It can be changed to any port
number in the range from 2000 to 65535.
3. Enter the IP address and port if you want to upload the alarm information to the
remote alarm host. Also check the
Linkage of each event page.
4. Click Save to save changes.
To define the DDNS parameters:
1. From the menu toolbar, click
2. Check Enable DDNS
3. Select DDNS Type. Two options are available: DynDNS and IPServer.
• Select DDNS Type. Select one of the follow options:
• DynDNS: Enter the DDNS server address, members.ddns.org, which is used to
notify DDNS about changes to your IP address, the host name for your camera,
the port number (443 (HTTPS)), and your user name and password used to log
16
Description
A NAT (Network Address Translation) is used for network connection.
Select the port mapping mode: auto or manual. See page 20 for setup
information.
Specifies authentication of the web site and its associated web server,
which protects against Man-in-the-middle attacks.
Configuration
Preferred DNS Server or Alternate DNS
> Network, click the
Notify Alarm Recipient
Configuration
to enable this feature.
> Network > TCP/IP.
Port tab to open its window.
> Network > DDNS.
TruVision Series 4 IP Camera Configuration Manual
Server.
option in the normal