Defining The System Time - Interlogix TruVision TVD-N210V-2-N(-P) User Manual

5. Select the time format from the
hour and 12-hour.
6. Select a display mode for the camera from the
modes include:
•
Transparent &
text. This is default.
•
Transparent &
The text flashes on and off.
•
Non-Transparent &
•
Non-Transparent &
text flashes on and off.
7. Click to save changes.
Save

Defining the system time

NTP (Network Time Protocol) is a protocol for synchronizing the clocks of
network devices, such as IP cameras and computers. Connecting network
devices to a dedicated NTP time server ensures that they are all synchronized.
To define the system time and date:
1. In the "Channel Parameters" folder click the
its screen.
2. Check one of the options for setting the time and date:
Synchronize with an NTP server: Check the enable box and enter the server
NTP address.
- Or -
Set manually: Enter the current date and time values.
3. Select your time zone.
TruVision IP Dome Open-Standards User Manual
Time format
Non-Flashing. The screen image appears through the
Flashing. The screen image appears through the text.
Non-Flashing. The screen image is behind the text.
Flashing. The screen image is behind the text. The
3BChapter 4: Configuring the camera
list box. Formats include: 24-
list box. Display
OSD Status
subfolder to open
Time & Date
29